On 3/3/09, Nenhum_de_Nos <[email protected]> wrote: > > On Mon, March 2, 2009 21:04, Fred Crowson wrote: >> What's the output of: ifconfig -a ? > > # ifconfig -a > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33204 > groups: lo > inet 127.0.0.1 netmask 0xff000000 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:11:85:e3:2a:17 > groups: egress > media: Ethernet autoselect (100baseTX full-duplex) > status: active > inet6 fe80::211:85ff:fee3:2a17%vr0 prefixlen 64 scopeid 0x1 > inet 10.1.1.90 netmask 0xffffff00 broadcast 10.1.1.255 > enc0: flags=0<> mtu 1536 > aue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:60:6e:00:18:c0 > media: Ethernet autoselect (none) > status: no carrier ^^^^^^^^^^ If the status is no carrier then that usually implies a cabling issue.
Not sure if this is your problem. HTH Fred
