Hi,
I AM trying to install openBSD 4.4 on a IBM 3550 7978 B1U but OpenBSD didn4t
recognize Adaptec ServeRaid 8k.
I4d like to know if someone run it on a server with this raid controller.
I installed a custom openbsd kernel ( with aac* support) on a USB stick ,
boot it on IBM 3550 and this is the dmesg:
I also tried disabling acpi.
OpenBSD 4.4 (rox) #0: Wed Apr 8 16:27:08 BRT 2009
r...@tux:/usr/sys/arch/i386/compile/rox
cpu0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz ("GenuineIntel" 686-class) 2
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem = 2137350144 (2038MB)
avail mem = 2058268672 (1962MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/25/08, BIOS32 rev. 0 @ 0xffa10,
SMBIOS rev. 2.4 @ 0xf6be0 (62 entries)
bios0: vendor Dell Inc. version "A07" date 07/25/2008
bios0: Dell Inc. Latitude D530
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC ASF! MCFG TCPA SLIC SSDT
acpi0: wakeup devices PCI0(S5) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) USB4(S0)
USB5(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S3) RP02(S4) RP03(S3) RP04(S3)
RP05(S3) RP06(S5) LID_(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 3 (PCIE)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 11 (RP01)
acpiprt3 at acpi0: bus 12 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus 9 (RP06)
acpiprt8 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C3
acpitz0 at acpi0: critical temperature 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "DELL TT7108" serial 4001 type LION oem "Sanyo"
acpibat1 at acpi0: BAT1 not present
acpidock at acpi0 not configured
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x1000
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06170b2d06000a25
cpu0: using only highest, current and lowest power states
cpu0: Enhanced SpeedStep 2000 MHz (1292 mV): speeds: 2200, 2000, 1200 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
agp0 at vga1: aperture at 0xe0000000, size 0x10000000
drm at vga1 unsupported
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: irq 10
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: irq 9
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: irq 9
azalia0: codec[s]: Sigmatel/0x76a0, Conexant/0x2c06, using Sigmatel/0x76a0
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: irq 11
pci1 at ppb0 bus 11
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: irq 3
pci2 at ppb1 bus 12
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq 3,
MoW2, address 00:1f:3c:bf:c0:9d
ppb2 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x02: irq 3
pci3 at ppb2 bus 9
bge0 at pci3 dev 0 function 0 "Broadcom BCM5755M" rev 0x02, BCM5755 A2
(0xa002): irq 3, address 00:1e:c9:23:04:f0
brgphy0 at bge0 phy 1: BCM5755 10/100/1000baseT PHY, rev. 0
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: irq 10
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: irq 9
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: irq 5
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: irq 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf2
pci4 at ppb3 bus 3
cbb0 at pci4 dev 1 function 0 vendor "O2 Micro", unknown product 0x7135 rev
0x21: irq 11
"O2 Micro Firewire" rev 0x02 at pci4 dev 1 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD+-RW GSA-T21N, A1R1> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x02: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <FUJITSU MHZ2080BH G2>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: SMI
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask efe5 netmask efed ttymask ffff
mtrr: Pentium Pro MTRR support
umass0 at uhub1 port 1 configuration 1 interface 0 "Kingston DataTraveler 2.0"
rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2
0/direct removable
sd0: 3858MB, 491 cyl, 255 head, 63 sec, 512 bytes/sec, 7902208 sec total
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
FreeBSD 7.14s dmesg:
aac0: <IBM ServeRAID-8k> port 0x4000-0x40ff mem
0xcce00000-0xccffffff,0xcafe0000-0xcaffffff irq 17 at device 0.0 on pci2
aac0: Enable Raw I/O
aac0: Enable 64-bit array
aac0: New comm. interface enabled
aac0: [ITHREAD]
aac0: ServeRAID 8k-l , aac driver 2.0.0-1
;((((
