you have to use aac driver from 4.5+ for you controller to work. http://www.openbsd.org/plus.html (look for aac)
Regards, 2009/4/9 Ricardo Augusto de Souza <[email protected]> > I sent dmesg of my notebook. Sorry. > > OpenBSD 4.4 (rox) #0: Wed Apr 8 16:27:08 BRT 2009 > r...@tux:/usr/sys/arch/i386/compile/rox > cpu0: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz ("GenuineIntel" 686-class) 2 > GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2 > ,CX16,xTPR > real mem = 2952105984 (2815MB) > avail mem = 2856112128 (2723MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 01/29/09, BIOS32 rev. 0 @ 0xfd841, > SMBIOS rev. 2.4 @ 0xaffcee80 (86 entries) > bios0: vendor IBM version "-[GFE143AUS-1.13]-" date 01/29/2009 > bios0: IBM IBM System x3550 -[7978B1U]- > acpi0 at bios0: rev 2 > acpi0: tables DSDT FACP APIC SRAT HPET MCFG ERST > acpi0: wakeup devices PCI0(S5) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 19 (PCI6) > acpiprt1 at acpi0: bus 23 (PCIA) > acpiprt2 at acpi0: bus 1 (PCIS) > acpiprt3 at acpi0: bus 0 (PCI0) > acpicpu0 at acpi0 > bios0: ROM list: 0xc0000/0xb000 0xcb000/0x1800 0xcc800/0x1800 > 0xce000/0x5000! > ipmi at mainbus0 not configured > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x31 > ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE x8" rev 0x31 > pci1 at ppb0 bus 16 > ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 > pci2 at ppb1 bus 17 > ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01 > pci3 at ppb2 bus 19 > ppb3 at pci3 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev > 0x04 > pci4 at ppb3 bus 20 > ppb4 at pci4 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev > 0x04 > pci5 at ppb4 bus 21 > em0 at pci5 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: irq > 3, address 00:15:17:7b:9a:b0 > em1 at pci5 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: irq > 10, address 00:15:17:7b:9a:b1 > ppb5 at pci4 dev 1 function 0 vendor "IDT", unknown product 0x8018 rev > 0x04 > pci6 at ppb5 bus 22 > em2 at pci6 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: irq > 10, address 00:15:17:7b:9a:b2 > em3 at pci6 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: irq > 7, address 00:15:17:7b:9a:b3 > ppb6 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01 > pci7 at ppb6 bus 18 > ppb7 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01 > pci8 at ppb7 bus 23 > ppb8 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x31 > pci9 at ppb8 bus 35 > ppb9 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0x31 > pci10 at ppb9 bus 7 > ppb10 at pci10 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev > 0x04 > pci11 at ppb10 bus 8 > ppb11 at pci11 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev > 0x04 > pci12 at ppb11 bus 9 > em4 at pci12 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: > irq 7, address 00:15:17:7b:be:f0 > em5 at pci12 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: > irq 3, address 00:15:17:7b:be:f1 > ppb12 at pci11 dev 1 function 0 vendor "IDT", unknown product 0x8018 rev > 0x04 > pci13 at ppb12 bus 10 > em6 at pci13 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: > irq 3, address 00:15:17:7b:be:f2 > em7 at pci13 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: > irq 10, address 00:15:17:7b:be:f3 > ppb13 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x31 > pci14 at ppb13 bus 34 > ppb14 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x31 > pci15 at ppb14 bus 3 > ppb15 at pci15 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 > pci16 at ppb15 bus 4 > bnx0 at pci16 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 7 > ppb16 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x31 > pci17 at ppb16 bus 2 > "Adaptec ASR-2120S" rev 0x02 at pci17 dev 0 function 0 not configured > "Intel I/OAT" rev 0x31 at pci0 dev 8 function 0 not configured > pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x31 > pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x31 > pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x31 > pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x31 > pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x31 > pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x31 > pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x31 > ppb17 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09 > pci18 at ppb17 bus 5 > ppb18 at pci18 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3 > pci19 at ppb18 bus 6 > bnx1 at pci19 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 3 > uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5 > uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 11 > uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 5 > ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb19 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9 > pci20 at ppb19 bus 1 > vga1 at pci20 dev 1 function 0 "ATI ES1000" rev 0x02 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > drm at vga1 unsupported > ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM > disabled > pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets, initiator 7 > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-T10N, 1.00> ATAPI > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 ignored (disabled) > ichiic0 at pci0 dev 31 function 3 "Intel 6321ESB SMBus" rev 0x09: > polling > iic0 at ichiic0 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > biomask f965 netmask fded ttymask ffff > mtrr: Pentium Pro MTRR support > umass0 at uhub0 port 3 configuration 1 interface 0 "Kingston > DataTraveler 2.0" rev 2.00/2.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 > 0/direct removable > sd0: 3858MB, 491 cyl, 255 head, 63 sec, 512 bytes/sec, 7902208 sec total > uhub4 at uhub2 port 2 "Silitek IBM USB HUB KEYBOARD" rev 1.10/1.00 addr > 2 > uhidev0 at uhub4 port 1 configuration 1 interface 0 "Silitek IBM USB HUB > KEYBOARD" rev 1.10/1.00 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 modifier keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub4 port 3 configuration 1 interface 0 "vendor 0x15ca USB > Optical Mouse" rev 2.00/5.12 addr 4 > uhidev1: iclass 3/1 > ums0 at uhidev1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > softraid0 at root > root on sd0a swap on sd0b dump on sd0b > bnx1: address 00:1a:64:79:f1:5a > brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6 > bnx0: address 00:1a:64:79:f1:58 > brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6 > > -----Mensagem original----- > De: [email protected] [mailto:[email protected]] Em nome de > Ricardo Augusto de Souza > Enviada em: quinta-feira, 9 de abril de 2009 18:16 > Para: [email protected] > Assunto: Who runs OpenBSD with Adaptec ? > > Hi, > > > > I AM trying to install openBSD 4.4 on a IBM 3550 7978 B1U but OpenBSD > didn4t > recognize Adaptec ServeRaid 8k. > > > > I4d like to know if someone run it on a server with this raid > controller. > > > > I installed a custom openbsd kernel ( with aac* support) on a USB > stick , > boot it on IBM 3550 and this is the dmesg: > > I also tried disabling acpi. > > > > OpenBSD 4.4 (rox) #0: Wed Apr 8 16:27:08 BRT 2009 > > r...@tux:/usr/sys/arch/i386/compile/rox > > cpu0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz ("GenuineIntel" > 686-class) 2 > GHz > > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, > CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2, > CX16, > xTPR > > real mem = 2137350144 (2038MB) > > avail mem = 2058268672 (1962MB) > > mainbus0 at root > > bios0 at mainbus0: AT/286+ BIOS, date 07/25/08, BIOS32 rev. 0 @ 0xffa10, > SMBIOS rev. 2.4 @ 0xf6be0 (62 entries) > > bios0: vendor Dell Inc. version "A07" date 07/25/2008 > > bios0: Dell Inc. Latitude D530 > > acpi0 at bios0: rev 2 > > acpi0: tables DSDT FACP HPET APIC ASF! MCFG TCPA SLIC SSDT > > acpi0: wakeup devices PCI0(S5) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) > USB4(S0) > USB5(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S3) RP02(S4) RP03(S3) RP04(S3) > RP05(S3) RP06(S5) LID_(S3) PBTN(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpihpet0 at acpi0: 14318179 Hz > > acpiprt0 at acpi0: bus 3 (PCIE) > > acpiprt1 at acpi0: bus -1 (AGP_) > > acpiprt2 at acpi0: bus 11 (RP01) > > acpiprt3 at acpi0: bus 12 (RP02) > > acpiprt4 at acpi0: bus -1 (RP03) > > acpiprt5 at acpi0: bus -1 (RP04) > > acpiprt6 at acpi0: bus -1 (RP05) > > acpiprt7 at acpi0: bus 9 (RP06) > > acpiprt8 at acpi0: bus 0 (PCI0) > > acpicpu0 at acpi0: C3 > > acpitz0 at acpi0: critical temperature 99 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: PBTN > > acpibtn2 at acpi0: SBTN > > acpiac0 at acpi0: AC unit offline > > acpibat0 at acpi0: BAT0 model "DELL TT7108" serial 4001 type LION oem > "Sanyo" > > acpibat1 at acpi0: BAT1 not present > > acpidock at acpi0 not configured > > acpivideo at acpi0 not configured > > acpivideo at acpi0 not configured > > acpivideo at acpi0 not configured > > bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x1000 > > cpu0 at mainbus0 > > cpu0: unknown Enhanced SpeedStep CPU, msr 0x06170b2d06000a25 > > cpu0: using only highest, current and lowest power states > > cpu0: Enhanced SpeedStep 2000 MHz (1292 mV): speeds: 2200, 2000, 1200 > MHz > > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > > pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c > > vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > agp0 at vga1: aperture at 0xe0000000, size 0x10000000 > > drm at vga1 unsupported > > "Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured > > uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: irq 10 > > uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: irq 9 > > ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: irq 5 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: irq > 9 > > azalia0: codec[s]: Sigmatel/0x76a0, Conexant/0x2c06, using > Sigmatel/0x76a0 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: irq 11 > > pci1 at ppb0 bus 11 > > ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: irq 3 > > pci2 at ppb1 bus 12 > > wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: irq > 3, > MoW2, address 00:1f:3c:bf:c0:9d > > ppb2 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x02: irq 3 > > pci3 at ppb2 bus 9 > > bge0 at pci3 dev 0 function 0 "Broadcom BCM5755M" rev 0x02, BCM5755 A2 > (0xa002): irq 3, address 00:1e:c9:23:04:f0 > > brgphy0 at bge0 phy 1: BCM5755 10/100/1000baseT PHY, rev. 0 > > uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: irq 10 > > uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: irq 9 > > uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: irq 5 > > ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: irq 10 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf2 > > pci4 at ppb3 bus 3 > > cbb0 at pci4 dev 1 function 0 vendor "O2 Micro", unknown product 0x7135 > rev > 0x21: irq 11 > > "O2 Micro Firewire" rev 0x02 at pci4 dev 1 function 4 not configured > > cardslot0 at cbb0 slot 0 flags 0 > > cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20 > > pcmcia0 at cardslot0 > > ichpcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x02: PM > disabled > > pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x02: DMA, > channel > 0 configured to compatibility, channel 1 configured to compatibility > > atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus0 at atapiscsi0: 2 targets, initiator 7 > > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD+-RW GSA-T21N, A1R1> ATAPI > 5/cdrom > removable > > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > > pciide0: channel 1 ignored (disabled) > > pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x02: DMA, > channel > 0 configured to native-PCI, channel 1 configured to native-PCI > > pciide1: using irq 10 for native-PCI interrupt > > wd0 at pciide1 channel 0 drive 0: <FUJITSU MHZ2080BH G2> > > wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors > > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > > ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: SMI > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM > > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM > > usb2 at uhci0: USB revision 1.0 > > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb3 at uhci1: USB revision 1.0 > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb4 at uhci2: USB revision 1.0 > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb5 at uhci3: USB revision 1.0 > > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at uhci4: USB revision 1.0 > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at ichpcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > pckbc0: using irq 12 for aux slot > > wsmouse0 at pms0 mux 0 > > pcppi0 at isa0 port 0x61 > > midi0 at pcppi0: <PC speaker> > > spkr0 at pcppi0 > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > biomask efe5 netmask efed ttymask ffff > > mtrr: Pentium Pro MTRR support > > umass0 at uhub1 port 1 configuration 1 interface 0 "Kingston > DataTraveler 2.0" > rev 2.00/2.00 addr 2 > > umass0: using SCSI over Bulk-Only > > scsibus1 at umass0: 2 targets, initiator 0 > > sd0 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 > 0/direct removable > > sd0: 3858MB, 491 cyl, 255 head, 63 sec, 512 bytes/sec, 7902208 sec total > > softraid0 at root > > root on sd0a swap on sd0b dump on sd0b > > > > FreeBSD 7.14s dmesg: > > aac0: <IBM ServeRAID-8k> port 0x4000-0x40ff mem > 0xcce00000-0xccffffff,0xcafe0000-0xcaffffff irq 17 at device 0.0 on pci2 > > aac0: Enable Raw I/O > > aac0: Enable 64-bit array > > aac0: New comm. interface enabled > > aac0: [ITHREAD] > > aac0: ServeRAID 8k-l , aac driver 2.0.0-1 > > > > > > ;(((( > > -- Eduardo Alvarenga
