On 2010-11-01 21:36:04, Philip Guenther <[email protected]> wrote: > > [...] > > So, while that change hasn't been recommitted yet, if you're > running into problems with suspend or resume on a box that it > worked fine on before, some sort of "worked with kernel from > <date1>, failed on kernel from <date2>" really would assist in > tracking this down. And build from a clean directory. >
Suspend/resume mostly worked with the Aug 02nd snap and mostly failed on the Aug 04th snap :) I guess you can call this a "me too" in that I've been experiencing many of the same issues everyone else seems to have with their T60s. There was a brief window in in late July/early August about a week long where it would successfully suspend and resume, but the screen would never turn back on. Anytime before or after that and it would suspend fine, but when it resumes it's totally unresponsive to anything except a 4 second press of the power button. I did a little bit of testing and sent a report to dmesg@ back when the call for testing went out. I've attached it to this mail in case it might be useful. NB, my T60 has a Radeon X1300 in it whereas the other two posters in this thread have an X1400. Not sure how relevant that is in this case though... -- Bryan ----- Forwarded message from Bryan Linton <[email protected]> ----- Date: Fri, 6 Aug 2010 23:23:43 -0800 From: Bryan Linton <[email protected]> To: [email protected] Subject: IBM Thinkpad T60 w/ATI video, suspend works, resume works w/blank screen, everything else OK Content-Type: multipart/mixed; boundary="n8g4imXOkfNTN/H1" Content-Disposition: inline User-Agent: Mutt/1.5.20 (2009-06-14) Content-Length: 11265 With the Aug 02nd snap: Suspend works fine but resume comes up with a blank screen. Keyboard works fine after resume as evidenced by "du /usr" causing the HDD light to blink with appropriate noises coming from the HDD. Ctrl-C stops this activity. Also, either pressing Fn-F4 (the key combination to suspend the laptop) or typing in "apm -S" or "apm -z" successfully suspends the system again, coming back to a blank screen upon resuming with a still working keyboard. Wired network works fine, as evidenced by playing an audio file over NFS, then suspend/resume, and still being able to seek all the way to the end (and randomly). This was an mp3 that was several hundred megabytes in size so I don't think that buffering would have pulled the whole file in. However, after resuming, typing in "halt", "halt -p" or "reboot" cause a brief flicker of the HDD activity light and appear to otherwise have no effect. The system always fscks all filesystems after having to hold the power button down for ~4 seconds to turn it off. "halt -p" and "reboot" work fine and have their intended effects if the system has not been suspended. There was no difference in behavior between bsd.sp and bsd.mp. apmd was running during all these tests. All tests were done at the console. The Aug 04th and Aug 05th snap show a regression in that suspend works, but on resume the moon-shaped sleep LED blinks until the machine is rebooted instead of turning off or staying solid green. The screen is still blank, but the keyboard and network do not work at all after resuming. All other functionality is the same between the snapshots if the machine has not been suspended. Wired/Wireless networking, audio, screen-brightness/volume buttons, etc. all work fine. OpenBSD 4.8-beta (GENERIC.MP) #295: Mon Aug 2 19:32:22 MDT 2010 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM real mem = 2682679296 (2558MB) avail mem = 2628812800 (2507MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 04/01/10, BIOS32 rev. 0 @ 0xfd6b0, SMBIOS rev. 2.4 @ 0xe0010 (68 entries) bios0: vendor LENOVO version "79ETE6WW (2.26 )" date 04/01/2010 bios0: LENOVO 2623D9U acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET BOOT SSDT SSDT SSDT SSDT acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 166MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 2, remapped to apid 1 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (AGP_) acpiprt2 at acpi0: bus 2 (EXP0) acpiprt3 at acpi0: bus 3 (EXP1) acpiprt4 at acpi0: bus 4 (EXP2) acpiprt5 at acpi0: bus 12 (EXP3) acpiprt6 at acpi0: bus 21 (PCI1) acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpipwrres0 at acpi0: PUBS acpitz0 at acpi0: critical temperature 127 degC acpitz1 at acpi0: critical temperature 99 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "92P1139" serial 659 type LION oem "Panasonic" acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: GDCK not docked (0) bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x1000 0xd1000/0x1000 0xdc000/0x4000! 0xe0000/0x10000! cpu0: Enhanced SpeedStep 1663 MHz: speeds: 1667, 1333, 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: apic 1 int 16 (irq 11) pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility X1300 M52-64" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 1 int 16 (irq 11) drm0 at radeondrm0 azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 1 int 17 (irq 11) azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog Devices AD1981HD audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20 (irq 11) pci2 at ppb1 bus 2 em0 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 1 int 16 (irq 11), address 00:16:41:52:7e:81 ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21 (irq 11) pci3 at ppb2 bus 3 wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 1 int 17 (irq 11), MoW1, address 00:13:02:20:41:18 ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22 (irq 11) pci4 at ppb3 bus 4 ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23 (irq 11) pci5 at ppb4 bus 12 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17 (irq 11) uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 (irq 11) uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19 (irq 11) ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci6 at ppb5 bus 21 cbb0 at pci6 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int 16 (irq 11) cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0 pcmcia0 at cardslot0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4246N, 0X05> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 1 int 16 (irq 11), AHCI 1.1 scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, HTS541060G9SA00, MB3I> SCSI3 0/direct fixed sd0: 57231MB, 512 bytes/sec, 117210240 sec total ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 23 (irq 11) iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 aps0 at isa0 port 0x1600/31 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 2 softraid0 at root root on sd0a swap on sd0b dump on sd0b WARNING: / was not properly unmounted hw.sensors.acpitz0.temp0=48.00 degC (zone temperature) hw.sensors.acpitz1.temp0=48.00 degC (zone temperature) hw.sensors.acpibat0.volt0=10.80 VDC (voltage) hw.sensors.acpibat0.volt1=12.47 VDC (current voltage) hw.sensors.acpibat0.watthour0=51.21 Wh (last full capacity) hw.sensors.acpibat0.watthour1=2.56 Wh (warning capacity) hw.sensors.acpibat0.watthour2=0.20 Wh (low capacity) hw.sensors.acpibat0.watthour3=51.21 Wh (remaining capacity), OK hw.sensors.acpibat0.raw0=0 (battery full), OK hw.sensors.acpibat0.raw1=0 (rate) hw.sensors.acpiac0.indicator0=On (power supply) hw.sensors.acpithinkpad0.temp0=48.00 degC hw.sensors.acpithinkpad0.temp1=31.00 degC hw.sensors.acpithinkpad0.temp2=33.00 degC hw.sensors.acpithinkpad0.temp3=64.00 degC hw.sensors.acpithinkpad0.temp4=50.00 degC hw.sensors.acpithinkpad0.temp6=26.00 degC hw.sensors.acpithinkpad0.fan0=0 RPM hw.sensors.acpidock0.indicator0=Off (not docked) hw.sensors.cpu0.temp0=48.00 degC hw.sensors.aps0.temp0=31.00 degC hw.sensors.aps0.temp1=31.00 degC hw.sensors.aps0.indicator0=Off (Keyboard Active) hw.sensors.aps0.indicator1=Off (Mouse Active) hw.sensors.aps0.indicator2=On (Lid Open) hw.sensors.aps0.raw0=478 (X_ACCEL) hw.sensors.aps0.raw1=542 (Y_ACCEL) hw.sensors.aps0.raw2=479 (X_VAR) hw.sensors.aps0.raw3=539 (Y_VAR) --- dmesg-4.8-beta-Aug-02-laptop.txt Tue Aug 3 22:28:51 2010 +++ dmesg-4.8-beta-Aug-05-laptop.txt Fri Aug 6 22:34:25 2010 @@ -1,14 +1,15 @@ -OpenBSD 4.8-beta (GENERIC.MP) #295: Mon Aug 2 19:32:22 MDT 2010 +OpenBSD 4.8-beta (GENERIC.MP) #318: Thu Aug 5 18:37:35 MDT 2010 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Genuine Intel(R) CPU T2300 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM real mem = 2682679296 (2558MB) -avail mem = 2628812800 (2507MB) +avail mem = 2628820992 (2507MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 04/01/10, BIOS32 rev. 0 @ 0xfd6b0, SMBIOS rev. 2.4 @ 0xe0010 (68 entries) bios0: vendor LENOVO version "79ETE6WW (2.26 )" date 04/01/2010 bios0: LENOVO 2623D9U acpi0 at bios0: rev 2 +acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET BOOT SSDT SSDT SSDT SSDT acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits @@ -117,4 +118,3 @@ ugen0 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 2 softraid0 at root root on sd0a swap on sd0b dump on sd0b -WARNING: / was not properly unmounted ----- End forwarded message -----
