I've an Atheros AR5424, which OpenBSD seems to detect correctly, but
does not really work.
The ath driver is used, and the man pages don't list this model as being
supported, but I though I might ask if there was some fix/etc.
# ifconfig ath0 chan
ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1f:e2:a2:c5:4f
priority: 4
groups: wlan
media: IEEE802.11 autoselect
status: no network
ieee80211: nwid ""
chan freq properties
# ifconfig ath0 scan
ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1f:e2:a2:c5:4f
priority: 4
groups: wlan
media: IEEE802.11 autoselect
status: no network
ieee80211: nwid ""
<blue>ath0: unable to reset hardware; hal status 4294934528
#
In reference to the above blue error, the man pages say it should not
happen. Again, the card is not listed as supported either.
I don't mind providing more feedback/testing patches/etc.
Cheers, and thanks.
dmesg:
OpenBSD 4.8-current (GENERIC.MP) #589: Mon Oct 18 16:29:17 MDT 2010
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2134712320 (2035MB)
avail mem = 2064023552 (1968MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe2c30 (25 entries)
bios0: vendor Hewlett-Packard version "F.33" date 04/29/2008
bios0: Hewlett-Packard Compaq Presario C700 Notebook PC
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC HPET MCFG ASF! SLIC BOOT SSDT
acpi0: wakeup devices SLPB(S4) P32_(S4) EXP1(S4) EXP2(S4) EXP3(S4)
EXP4(S4) EXP5(S4) EXP6(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.28 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu0: 1MB 64b/line 4-way L2 cache
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu1: 1MB 64b/line 4-way L2 cache
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus -1 (EXP4)
acpiprt6 at acpi0: bus -1 (EXP5)
acpiprt7 at acpi0: bus -1 (EXP6)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "Primary" type Lion oem "Hewlett-Packard"
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: OVGA
cpu0: Enhanced SpeedStep 1729 MHz: speeds: 1733, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic
4 int 22 (irq 11)
azalia0: codecs: Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 4 int
18 (irq 11)
pci1 at ppb0 bus 1
ath0 at pci1 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 16
(irq 11)
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:1f:e2:a2:c5:4f
uhci0 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 4 int
21 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 4 int
20 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 4 int
19 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 4 int
23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci2 at ppb1 bus 2
rl0 at pci2 dev 1 function 0 "Realtek 8139" rev 0x10: apic 4 int 16 (irq
11), address 00:1e:ec:78:5b:13
rlphy0 at rl0 phy 0: RTL internal PHY
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7561A, GH09> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 4
int 17 (irq 10), AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1200BEVS-6, 01.0> SCSI3
0/direct fixed
sd0: 114473MB, 512 bytes/sec, 234441648 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 4
int 19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 5 configuration 1 interface 0 "Generic USB2.0-CRW"
rev 2.00/51.95 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0
0/direct removable
sd1: drive offline
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Syntek USB2.0 UVC
PC Camera" rev 2.00/11.08 addr 3
video0 at uvideo0
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/2.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/2.00 addr 2
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
softraid0: sd3 was not shutdown properly
softraid0: sd3 was not shutdown properly
scsibus4 at softraid0: 1 targets
sd2 at scsibus4 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct
fixed
sd2: 111395MB, 512 bytes/sec, 228138538 sec total
softraid0: volume sd2 is roaming, it used to be sd3, updating metadata
ath0: unable to reset hardware; hal status 4294967295
ath0: unable to reset hardware; hal status 4294934528
umass1 at uhub0 port 2 configuration 1 interface 0 "Kingston
DataTraveler 2.0" rev 2.00/1.10 addr 4
umass1: using SCSI over Bulk-Only
scsibus5 at umass1: 2 targets, initiator 0
sd3 at scsibus5 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI0
0/direct removable
sd3: 3824MB, 512 bytes/sec, 7831552 sec total
ath0: unable to reset hardware; hal status 4294934528
umass2 at uhub0 port 3 configuration 1 interface 0 "Sony "PSP" Type A"
rev 2.00/1.00 addr 5
umass2: using ATAPI over Bulk-Only
scsibus6 at umass2: 2 targets, initiator 0
sd4 at scsibus6 targ 1 lun 0: <SONY, "PSP" MS, 1.00> ATAPI 0/direct
removable
sd4: 7632MB, 512 bytes/sec, 15630336 sec total
--
Hugo Osvaldo Barrera
