On Sun, Dec 19, 2010 at 2:21 AM, Hugo Osvaldo Barrera <h...@osvaldobarrera.com.ar> wrote: > I've an Atheros AR5424, which OpenBSD seems to detect correctly, but > does not really work. > The ath driver is used, and the man pages don't list this model as being > supported, but I though I might ask if there was some fix/etc. > > > # ifconfig ath0 chan > ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500 > B B B B lladdr 00:1f:e2:a2:c5:4f > B B B B priority: 4 > B B B B groups: wlan > B B B B media: IEEE802.11 autoselect > B B B B status: no network > B B B B ieee80211: nwid "" > B B B B B B B B chan B freq B B B properties > # ifconfig ath0 scan > ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500 > B B B B lladdr 00:1f:e2:a2:c5:4f > B B B B priority: 4 > B B B B groups: wlan > B B B B media: IEEE802.11 autoselect > B B B B status: no network > B B B B ieee80211: nwid "" > <blue>ath0: unable to reset hardware; hal status 4294934528 > # > > In reference to the above blue error, the man pages say it should not > happen. B Again, the card is not listed as supported either. > > I don't mind providing more feedback/testing patches/etc. > Cheers, and thanks. > > dmesg: > > OpenBSD 4.8-current (GENERIC.MP) #589: Mon Oct 18 16:29:17 MDT 2010 > B B dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 2134712320 (2035MB) > avail mem = 2064023552 (1968MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe2c30 (25 entries) > bios0: vendor Hewlett-Packard version "F.33" date 04/29/2008 > bios0: Hewlett-Packard Compaq Presario C700 Notebook PC > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC HPET MCFG ASF! SLIC BOOT SSDT > acpi0: wakeup devices SLPB(S4) P32_(S4) EXP1(S4) EXP2(S4) EXP3(S4) > EXP4(S4) EXP5(S4) EXP6(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.28 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX1 6,xTPR,PDCM,NXE,LONG > cpu0: 1MB 64b/line 4-way L2 cache > cpu0: apic clock running at 132MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.00 MHzI doesn't work.
http://marc.info/?l=openbsd-misc&m=126420221716157&w=2 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX1 6,xTPR,PDCM,NXE,LONG > cpu1: 1MB 64b/line 4-way L2 cache > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 4 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (P32_) > acpiprt2 at acpi0: bus 1 (EXP1) > acpiprt3 at acpi0: bus -1 (EXP2) > acpiprt4 at acpi0: bus -1 (EXP3) > acpiprt5 at acpi0: bus -1 (EXP4) > acpiprt6 at acpi0: bus -1 (EXP5) > acpiprt7 at acpi0: bus -1 (EXP6) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpitz0 at acpi0: critical temperature 100 degC > acpibtn0 at acpi0: PWRB > acpibtn1 at acpi0: LID0 > acpibtn2 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "Primary" type Lion oem "Hewlett-Packard" > acpiac0 at acpi0: AC unit online > acpivideo0 at acpi0: OVGA > cpu0: Enhanced SpeedStep 1729 MHz: speeds: 1733, 1333, 1067, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03 > vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0x80000000, size 0x10000000 > inteldrm0 at vga1: apic 4 int 16 (irq 11) > drm0 at inteldrm0 > "Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic > 4 int 22 (irq 11) > azalia0: codecs: Conexant CX20561 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 4 int > 18 (irq 11) > pci1 at ppb0 bus 1 > ath0 at pci1 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 16 > (irq 11) > ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:1f:e2:a2:c5:4f > uhci0 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 4 int > 21 (irq 11) > uhci1 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 4 int > 20 (irq 11) > uhci2 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 4 int > 19 (irq 11) > ehci0 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 4 int > 23 (irq 11) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 > pci2 at ppb1 bus 2 > rl0 at pci2 dev 1 function 0 "Realtek 8139" rev 0x10: apic 4 int 16 (irq > 11), address 00:1e:ec:78:5b:13 > rlphy0 at rl0 phy 0: RTL internal PHY > pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03 > pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7561A, GH09> ATAPI > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 > pciide0: channel 1 disabled (no drives) > ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 4 > int 17 (irq 10), AHCI 1.1 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1200BEVS-6, 01.0> SCSI3 > 0/direct fixed > sd0: 114473MB, 512 bytes/sec, 234441648 sec total > ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 4 > int 19 (irq 11) > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > mtrr: Pentium Pro MTRR support > umass0 at uhub0 port 5 configuration 1 interface 0 "Generic USB2.0-CRW" > rev 2.00/51.95 addr 2 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 > 0/direct removable > sd1: drive offline > uvideo0 at uhub0 port 6 configuration 1 interface 0 "Syntek USB2.0 UVC > PC Camera" rev 2.00/11.08 addr 3 > video0 at uvideo0 > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB > Receiver" rev 2.00/2.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 16 buttons, Z dir > wsmouse1 at ums0 mux 0 > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB > Receiver" rev 2.00/2.00 addr 2 > uhidev1: iclass 3/0, 17 report ids > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 > uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0 > uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > root on sd0a swap on sd0b dump on sd0b > WARNING: / was not properly unmounted > softraid0: sd3 was not shutdown properly > softraid0: sd3 was not shutdown properly > scsibus4 at softraid0: 1 targets > sd2 at scsibus4 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct > fixed > sd2: 111395MB, 512 bytes/sec, 228138538 sec total > softraid0: volume sd2 is roaming, it used to be sd3, updating metadata > ath0: unable to reset hardware; hal status 4294967295 > ath0: unable to reset hardware; hal status 4294934528 > umass1 at uhub0 port 2 configuration 1 interface 0 "Kingston > DataTraveler 2.0" rev 2.00/1.10 addr 4 > umass1: using SCSI over Bulk-Only > scsibus5 at umass1: 2 targets, initiator 0 > sd3 at scsibus5 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI0 > 0/direct removable > sd3: 3824MB, 512 bytes/sec, 7831552 sec total > ath0: unable to reset hardware; hal status 4294934528 > umass2 at uhub0 port 3 configuration 1 interface 0 "Sony "PSP" Type A" > rev 2.00/1.00 addr 5 > umass2: using ATAPI over Bulk-Only > scsibus6 at umass2: 2 targets, initiator 0 > sd4 at scsibus6 targ 1 lun 0: <SONY, "PSP" MS, 1.00> ATAPI 0/direct > removable > sd4: 7632MB, 512 bytes/sec, 15630336 sec total > > > -- > Hugo Osvaldo Barrera > > I doesn't work. http://marc.info/?l=openbsd-misc&m=126420221716157&w=2