On Sun, 2010-12-19 at 02:36 -0600, Abel Abraham Camarillo Ojeda wrote: > On Sun, Dec 19, 2010 at 2:21 AM, Hugo Osvaldo Barrera > <h...@osvaldobarrera.com.ar> wrote: > > I've an Atheros AR5424, which OpenBSD seems to detect correctly, but > > does not really work. > > The ath driver is used, and the man pages don't list this model as being > > supported, but I though I might ask if there was some fix/etc. > > > > > > # ifconfig ath0 chan > > ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500 > > lladdr 00:1f:e2:a2:c5:4f > > priority: 4 > > groups: wlan > > media: IEEE802.11 autoselect > > status: no network > > ieee80211: nwid "" > > chan freq properties > > # ifconfig ath0 scan > > ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500 > > lladdr 00:1f:e2:a2:c5:4f > > priority: 4 > > groups: wlan > > media: IEEE802.11 autoselect > > status: no network > > ieee80211: nwid "" > > <blue>ath0: unable to reset hardware; hal status 4294934528 > > # > > > > In reference to the above blue error, the man pages say it should not > > happen. Again, the card is not listed as supported either. > > > > I don't mind providing more feedback/testing patches/etc. > > Cheers, and thanks. > > > > dmesg: > > > > OpenBSD 4.8-current (GENERIC.MP) #589: Mon Oct 18 16:29:17 MDT 2010 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 2134712320 (2035MB) > > avail mem = 2064023552 (1968MB) > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe2c30 (25 entries) > > bios0: vendor Hewlett-Packard version "F.33" date 04/29/2008 > > bios0: Hewlett-Packard Compaq Presario C700 Notebook PC > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP APIC HPET MCFG ASF! SLIC BOOT SSDT > > acpi0: wakeup devices SLPB(S4) P32_(S4) EXP1(S4) EXP2(S4) EXP3(S4) > > EXP4(S4) EXP5(S4) EXP6(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.28 MHz > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG > > cpu0: 1MB 64b/line 4-way L2 cache > > cpu0: apic clock running at 132MHz > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.00 MHzI doesn't > > work. > > http://marc.info/?l=openbsd-misc&m=126420221716157&w=2 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG > > cpu1: 1MB 64b/line 4-way L2 cache > > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins > > ioapic0: misconfigured as apic 0, remapped to apid 4 > > acpihpet0 at acpi0: 14318179 Hz > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 2 (P32_) > > acpiprt2 at acpi0: bus 1 (EXP1) > > acpiprt3 at acpi0: bus -1 (EXP2) > > acpiprt4 at acpi0: bus -1 (EXP3) > > acpiprt5 at acpi0: bus -1 (EXP4) > > acpiprt6 at acpi0: bus -1 (EXP5) > > acpiprt7 at acpi0: bus -1 (EXP6) > > acpiec0 at acpi0 > > acpicpu0 at acpi0: C3, C2, C1, PSS > > acpicpu1 at acpi0: C3, C2, C1, PSS > > acpitz0 at acpi0: critical temperature 100 degC > > acpibtn0 at acpi0: PWRB > > acpibtn1 at acpi0: LID0 > > acpibtn2 at acpi0: SLPB > > acpibat0 at acpi0: BAT0 model "Primary" type Lion oem "Hewlett-Packard" > > acpiac0 at acpi0: AC unit online > > acpivideo0 at acpi0: OVGA > > cpu0: Enhanced SpeedStep 1729 MHz: speeds: 1733, 1333, 1067, 800 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03 > > vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > intagp0 at vga1 > > agp0 at intagp0: aperture at 0x80000000, size 0x10000000 > > inteldrm0 at vga1: apic 4 int 16 (irq 11) > > drm0 at inteldrm0 > > "Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured > > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic > > 4 int 22 (irq 11) > > azalia0: codecs: Conexant CX20561 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 4 int > > 18 (irq 11) > > pci1 at ppb0 bus 1 > > ath0 at pci1 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 16 > > (irq 11) > > ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:1f:e2:a2:c5:4f > > uhci0 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 4 int > > 21 (irq 11) > > uhci1 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 4 int > > 20 (irq 11) > > uhci2 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 4 int > > 19 (irq 11) > > ehci0 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 4 int > > 23 (irq 11) > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 > > pci2 at ppb1 bus 2 > > rl0 at pci2 dev 1 function 0 "Realtek 8139" rev 0x10: apic 4 int 16 (irq > > 11), address 00:1e:ec:78:5b:13 > > rlphy0 at rl0 phy 0: RTL internal PHY > > pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03 > > pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, > > channel 0 configured to compatibility, channel 1 configured to > > compatibility > > atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus0 at atapiscsi0: 2 targets > > cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7561A, GH09> ATAPI > > 5/cdrom removable > > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 > > pciide0: channel 1 disabled (no drives) > > ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 4 > > int 17 (irq 10), AHCI 1.1 > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1200BEVS-6, 01.0> SCSI3 > > 0/direct fixed > > sd0: 114473MB, 512 bytes/sec, 234441648 sec total > > ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 4 > > int 19 (irq 11) > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM > > usb1 at uhci0: USB revision 1.0 > > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb2 at uhci1: USB revision 1.0 > > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb3 at uhci2: USB revision 1.0 > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > pckbc0: using irq 12 for aux slot > > wsmouse0 at pms0 mux 0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > mtrr: Pentium Pro MTRR support > > umass0 at uhub0 port 5 configuration 1 interface 0 "Generic USB2.0-CRW" > > rev 2.00/51.95 addr 2 > > umass0: using SCSI over Bulk-Only > > scsibus2 at umass0: 2 targets, initiator 0 > > sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 > > 0/direct removable > > sd1: drive offline > > uvideo0 at uhub0 port 6 configuration 1 interface 0 "Syntek USB2.0 UVC > > PC Camera" rev 2.00/11.08 addr 3 > > video0 at uvideo0 > > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB > > Receiver" rev 2.00/2.00 addr 2 > > uhidev0: iclass 3/1 > > ums0 at uhidev0: 16 buttons, Z dir > > wsmouse1 at ums0 mux 0 > > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB > > Receiver" rev 2.00/2.00 addr 2 > > uhidev1: iclass 3/0, 17 report ids > > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 > > uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0 > > uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0 > > vscsi0 at root > > scsibus3 at vscsi0: 256 targets > > softraid0 at root > > root on sd0a swap on sd0b dump on sd0b > > WARNING: / was not properly unmounted > > softraid0: sd3 was not shutdown properly > > softraid0: sd3 was not shutdown properly > > scsibus4 at softraid0: 1 targets > > sd2 at scsibus4 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct > > fixed > > sd2: 111395MB, 512 bytes/sec, 228138538 sec total > > softraid0: volume sd2 is roaming, it used to be sd3, updating metadata > > ath0: unable to reset hardware; hal status 4294967295 > > ath0: unable to reset hardware; hal status 4294934528 > > umass1 at uhub0 port 2 configuration 1 interface 0 "Kingston > > DataTraveler 2.0" rev 2.00/1.10 addr 4 > > umass1: using SCSI over Bulk-Only > > scsibus5 at umass1: 2 targets, initiator 0 > > sd3 at scsibus5 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI0 > > 0/direct removable > > sd3: 3824MB, 512 bytes/sec, 7831552 sec total > > ath0: unable to reset hardware; hal status 4294934528 > > umass2 at uhub0 port 3 configuration 1 interface 0 "Sony "PSP" Type A" > > rev 2.00/1.00 addr 5 > > umass2: using ATAPI over Bulk-Only > > scsibus6 at umass2: 2 targets, initiator 0 > > sd4 at scsibus6 targ 1 lun 0: <SONY, "PSP" MS, 1.00> ATAPI 0/direct > > removable > > sd4: 7632MB, 512 bytes/sec, 15630336 sec total > > > > > > -- > > Hugo Osvaldo Barrera > > > > > > I doesn't work. > > http://marc.info/?l=openbsd-misc&m=126420221716157&w=2
Ok, thanks, I somehow failed to google this earlier. It's a shame I'm far from being skilled enough to do anything about it. :-( -- Hugo Osvaldo Barrera
