Have to install a PBX in germany, never been there 'cause usually i'm in
italy :)
Anyone has a working ISDN configuration for germany?
In italy i've to change the following settings:
in /etc/misdn-init.conf
# lower to 80 or not DTMF from EuteliaVOIP
# lower to 50 or not DTMF from our TDM400 FXO
dtmftreshold=50
dtmfthreshold=50
in /etc/asterisk/misdn.conf
bridging=no
stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
[default]
senddtmf=yes
far_alerting=no
allowed_bearers=all
nationalprefix=0
internationalprefix=00
te_choose_channel=no
pmp_l1_check=no <--- Telecom Italia switch off NT1+ when not in use!
need_more_infos=no
dialplan=0
localdialplan=0
cpndialplan=0
early_bconnect=yes
incoming_early_audio=no
always_immediate=no
nodialtone=no
immediate=no
presentation=-1
screen=-1
echocancel=0
jitterbuffer=4000
jitterbuffer_upper_threshold=0
hdlc=no
block_on_alarm=no
[card1]
ports=1
context=trunk-1
msns=*
language=it
callgroup=1
pickupgroup=
echocancel=0
This setup wil work in germany too or there is some special parameter
i've to change according to the telco provider?
Ty in advance!
Antonio
_______________________________________________
Misdn-asterisk mailing list
[email protected]
http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
