On 4-Dec-07, at 4:19 PM, Sacha Berger wrote: > > Am Dienstag, den 04.12.2007, 16:03 +0100 schrieb Oriol Puigbó: >> I've got a ALSA device with four channels (BCD3000). If I select this >> device (BCD3000: USB Audio(hw:1,0)) for both the Master and the >> Headphones in mixxx preferences menu, the master goes to channel 1 >> and >> 2, and the headphones go to channels 3 and 4. >> Therefore everything works fine magically without needing to modify >> asound.rc or anything else. >> You could try to assign your usb audio interface to both mixxx >> outputs >> and see what happens. >> > > Hell, you are right! I didn't realize, as on a 6 channel card channel > 3,4 is master and 5,6 is headphone... it's almost perfect---except > that > I have a headphone jack for channel 1,2 on the Terratec Phase26 and I > cannot assign it to the mixxx headphone but maybe there's an alsa > plugin > for rewiring the channels without dmix in asoundrc... I will see. >
Hmmm, is this with trunk? The sound code in SVN is supposed to pick channels 1 & 2 as the master output and 3 & 4 as the headphone output. Albert ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ Mixxx-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mixxx-devel
