Hi, All! I have two questions. Sensor ability. My controller has touch sensors on jogs. Can Mixxx hold sensor MIDI signal? So when I touch the sensor, if track is playing, it stops playing and acts ass jog (scratch/forward). When I release Sensor, if deck state is "playing" it continues playing from current position. Now my jog works without sensor. It works correctly when deck is stopped - when I rotate jog it seeks the track (as on vinyl). But when deck is playng, rotating jog forward makes track play faster, and rotating jog backward makes track play slower, slower and when it's speed reaches 0, it starts to reverse. Maybe someone like this, but I would use my sensor signal. Actually, in this situation, touch sensor must work as "pause". When its pressed (state "down") deck pauses and works as if it was stopped. When sensor is released, deck continues playing as if "play" was pressed. Of course I can quickly press "Play" then reverse/scratch/seek and quickly press "Play" again. But it is not comfortable.
Centres. In 1.6.0 knobs rotate correctly. But I cann't find the control name which I have to set to hold knob's Center. Knobs sends theyr Center signals when it reaches center, but Mixxx ignores it now. So knob may lag a little bit, and when MIDI knob is on center, actual Mixxx knob maybe a litle shifted. It's a bug. How can I set knob's center control? ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Mixxx-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mixxx-devel
