In a message dated 7/27/01 12:16:18 PM Pacific Daylight Time, 
[email protected] writes:

<< Are you sure about this? I think this is true only for VR6 engines. The 
only 
 stock adapter that fits our cars is the Eropean A1 GTI filter bracket. Never 
 seen one of those in an Audi. >>

Even the A1 GTI filter flange may not fit....

I bought one in the hopes of using it with my 91 Passat 9A block. Totally 
different "footprint"-- wouldn't bolt up. So I sold it and am currently using 
a Mocal sandwich adapter/Setrab cooler combo I bought from Autotech. All 
things considered, I opted for the poly hose, as I'd heard bad things about 
the "saw effect" of steel braided lines..

Few things worth mentioning about "kits". Autotech supplies four AN-10 
connectors (two straight and two 90 degree) a through the radiator mounting 
kit and 5 feet of Aeroquip hose. This would have been great had I not needed 
6 feet of hose and two 45 degree connectors instead of the straight ones.  I 
ended up spending an additional $111 locally for hose, connectors and some 
nylon spacers. I could have got by with the five feet, but that would have 
moved the cooler away from a prime location directly in front of the radiator 
fan.

Finished installation looks great, I even used some thermal sleeving and 
abrasion protection where the hoses route around the corner of the radiator 
near the wiring harness.

As far as using a heater core as a cooler- I'd be leery about it. Although 
coolant systems can develop some high internal pressures, they are pressure 
relieved at a far lower point than the oil system. The Setrab cooler I'm 
using wasn't all THAT expensive by itself, and is burst rated at 300psi. The 
fittings and AQP poly hose are also designed for moving oil at high 
temperature/pressure. If I had wanted to save a few bucks by going the 
wrecking yard route, there are other cars with factory oil coolers- think I'd 
raid one of them for their parts first.


Danny
81 Caddy 16V 
82 Audi 4000S
85 Cabriolet

(Please excuse an A1-16V owner posting to your list- I sub cause you guys 
rock)
_____________
List Sponsor: http://www.netsville.com
To remove yourself from this list, send mail to [email protected] with 
'unsubscribe a2_16v' in the body of your message
See us on the web at http://www.a2-16v.com
Visit the 16V Homepage at http://www.gti16v.org

Reply via email to