What does everyone else thing? Is Jorge right?
Renard
-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of
[email protected]
Sent: Friday, September 14, 2001 7:36 AM
To: Fli GLi
Cc: A2
Subject: Re: Failing MC, I think...
Renard,
Sounds like the piston seals are starting to fail. Replace the M/C. New
fluid and/or bleeding will not fix it. Before you put in the replacement
M/C make you bench bleed it, it'll make completing the job much faster
after you install it.
Jorge
87 GTI 16V
92 Passat GL
"Fli GLi"
<[email protected] To: "A2"
<[email protected]>
.com> cc:
Sent by: Subject: Failing MC, I
think...
owner-a2_16v@conne
cticom.com
09/13/2001 05:42
PM
So, what are the symptoms of a failing master cylinder? I have no
experience with MC. Here is what is happening:
- sporadically the pedal will go 3/4 to the floor
- when this happens, if I pump it 2-3 times I get pressure
- seems to only happen at slow speeds, i.e. in a parking lot, when moving
in
slow traffic, etc.
- when it is acting up I can put the pedal 3/4 to the floor when the car is
stopped by pressing on the pedal lightly; if I press hard or pump it I
get
pressure
It seems to only do this when the car is warmed up. It will do it for a
while, then stop. Some ideas I had :
- MC failing
- time to bleed the system
- time for new fluid
Anyone have any ideas/advice?? I need to get this taken care of soon b/f
I slam into someone.
Thanks,
Renard
_____________
List Sponsor: http://www.netsville.com
To remove yourself from this list, send mail to [email protected]
with 'unsubscribe a2_16v' in the body of your message
See us on the web at http://www.a2-16v.com
Visit the 16V Homepage at http://www.gti16v.org
_____________
List Sponsor: http://www.netsville.com
To remove yourself from this list, send mail to [email protected] with
'unsubscribe a2_16v' in the body of your message
See us on the web at http://www.a2-16v.com
Visit the 16V Homepage at http://www.gti16v.org
_____________
List Sponsor: http://www.netsville.com
To remove yourself from this list, send mail to [email protected] with
'unsubscribe a2_16v' in the body of your message
See us on the web at http://www.a2-16v.com
Visit the 16V Homepage at http://www.gti16v.org
