MessageLikewise. The stuff I use is more like a long-fibre unwoven material
cotton wool, but it was for a cooker hood.
Regards,
Owen.
----- Original Message -----
From: LawrenceLowe
To: mogtalk2
Sent: Thursday, July 19, 2012 11:24 PM
Subject: RE: [mogtalk2] Heater inlet screen
Gerry,
I used a piece of surplus foam mesh from a cooker hood filter kit.
Lawrence
-----Original Message-----
From: Gerald Wallace [mailto:[email protected]]
Sent: Thursday, July 19, 2012 8:28 PM
To: mogtalk2
Subject: [mogtalk2] Heater inlet screen
During my recent tour through France I became aware of a number of dead
insects landing up on my lap. I checked the heater inlet and found the open
mesh 'filter' to be a bit damaged. I'm trying to think of some suitable and
readily available substitute for the original- maybe a bit of nylon stocking.
Any other ideas? It needs to be fine enough to stop said insects, but not too
restrictive to the airflow.
Gerry
View posts on The Mail Archive
http://www.mail-archive.com/[email protected]/
Modify Your Subscription
View posts on The Mail Archive
http://www.mail-archive.com/[email protected]/
Modify Your Subscription
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5141 - Release Date: 07/19/12
-------------------------------------------
View posts on The Mail Archive
http://www.mail-archive.com/[email protected]/
[http://www.mail-archive.com/[email protected]/]
Modify Your Subscription:
https://www.listbox.com/member/?member_id=22459785&id_secret=22459785-4a39ddf8
Powered by Listbox: http://www.listbox.com
