On Monday 01 June 2009 15:13:29 Bill Hart wrote: > Revision 2070 builds with --enable-cxx and passes. > > Probably if you check out revision 2071, run aclocal, autoheader, > autoconf, automake, etc it will all be ok again. > > You'll have to add back in your sparc64 tuning and in Makefile.am > change mpirbench.sln to build.vc9 as this file has now moved inside > the directory. > > I thought I had finally found an autotools which didn't cause a > problem, but apparently not.
I use autotools from slackware(32bit) or bluewhite(64bit) v12.1 (not latest) > > Bill. > > 2009/6/1 Bill Hart <[email protected]>: > > OK, I get the same issue now. But it was only when I built with > > --enable-cxx. It does seem that libtool doesn't recognise the object > > files as output by the C++ compiler or something. > > > > It could be because I updated autotools, but it could also be > > something has changed on the machine. > > > > I'll try reverting to an earlier revision and see if the problem goes > > away. > > > > Bill. > > > > 2009/6/1 Bill Hart <[email protected]>: > >> I did get this when attempting to run configure: > >> > >> -bash: ./configure: /bin/sh: bad interpreter: Stale NFS file handle > >> > >> Looks like the NFS filesystem might be a bit flakey on that machine. > >> > >> Bill. > >> > >> 2009/6/1 Bill Hart <[email protected]>: > >>> I had no problems on fulvia with gcc-4.4.0. But I'm using a version of > >>> mpir-1.2 from before when I did > >>> > >>> aclocal > >>> autoheader > >>> autoconf > >>> automake > >>> makeinfo > >>> configure > >>> > >>> I'll try again by checking out trunk and see if I get the error. If > >>> so, you might have to run your autotools, as I'll have again found > >>> another broken autotools installation. > >>> > >>> Bill. > >>> > >>> 2009/6/1 Jason Moxham <[email protected]>: > >>>> we now have the same failure on mark , clearly something has changed > >>>> > >>>> On Monday 01 June 2009 13:38:31 Bill Hart wrote: > >>>>> Great. Just keep committing to trunk. We're not at an rc yet, so no > >>>>> need to create the branch yet. > >>>>> > >>>>> I'm going to try and see if I have anything to offer the Windows > >>>>> timing code which seems to be playing up terribly and if not start > >>>>> testing on other build farm systems. > >>>>> > >>>>> Bill. > >>>>> > >>>>> 2009/6/1 Jason Moxham <[email protected]>: > >>>>> > On Monday 01 June 2009 13:19:53 Bill Hart wrote: > >>>>> >> Does it work if you do not use parallel make? > >>>>> > > >>>>> > no change, I have look in an hour or so , I'm also retesting mark2 > >>>>> > , make sure nothing has changed there, The fft tuning on mark > >>>>> > should be finished in an hour or two. > >>>>> > > >>>>> > Jason > >>>>> > > >>>>> >> 2009/6/1 Jason Moxham <[email protected]>: > >>>>> >> > Something has changed ? > >>>>> >> > > >>>>> >> > Fulvia now fails again , with different options > >>>>> >> > > >>>>> >> > ./configure --enable-cxx && make -j 4 && make -j 4 check > >>>>> >> > > >>>>> >> > ranlib .libs/libmpir.a > >>>>> >> > rm -fr .libs/libmpir.lax > >>>>> >> > creating libmpir.la > >>>>> >> > (cd .libs && rm -f libmpir.la && ln -s ../libmpir.la libmpir.la) > >>>>> >> > /bin/bash ./libtool --tag=CXX --mode=link > >>>>> >> > g++ -O2 -m64 -march=core2 -mtune=core2 -o > >>>>> >> > libmpirxx.la -rpath /usr/local/lib -version-info 4:4:1 > >>>>> >> > dummy.lo cxx/isfuns.lo cxx/ismpf.lo cxx/ismpq.lo cxx/ismpz.lo > >>>>> >> > cxx/ismpznw.lo cxx/osdoprnti.lo cxx/osfuns.lo cxx/osmpf.lo > >>>>> >> > cxx/osmpq.lo cxx/osmpz.lo libmpir.la > >>>>> >> > g++ -shared -nostdlib /usr/lib/amd64/crti.o > >>>>> >> > /usr/lib/amd64/values-Xa.o > >>>>> >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-pc-solaris2 > >>>>> >> >.10/4. 4.0 /amd64/crtbegin.o .libs/dummy.o cxx/.libs/isfuns.o > >>>>> >> > cxx/.libs/ismpf.o cxx/.libs/ismpq.o cxx/.libs/ismpz.o > >>>>> >> > cxx/.libs/ismpznw.o > >>>>> >> > cxx/.libs/osdoprnti.o cxx/.libs/osfuns.o > >>>>> >> > cxx/.libs/osmpf.o cxx/.libs/osmpq.o > >>>>> >> > cxx/.libs/osmpz.o -Wl,--rpath -Wl,/tmp/jason/.libs -Wl,--rpath > >>>>> >> > -Wl,/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib -Wl,--rpath > >>>>> >> > -Wl,/usr/local/lib -Wl,--rpath > >>>>> >> > -Wl,/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib > >>>>> >> > ./.libs/libmpir.so > >>>>> >> > -L/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-pc-solari > >>>>> >> >s2.10/ 4.4 .0/amd64 > >>>>> >> > -L/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-pc-solari > >>>>> >> >s2.10/ 4.4 .0/../../../amd64 -L/lib/amd64 -L/usr/lib/amd64 > >>>>> >> > -L/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-pc-solari > >>>>> >> >s2.10/ 4.4 .0 > >>>>> >> > -L/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-pc-solari > >>>>> >> >s2.10/ 4.4 .0/../../.. > >>>>> >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/libstdc++.so -lm > >>>>> >> > -lgcc_s > >>>>> >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-pc-solaris2 > >>>>> >> >.10/4. 4.0 /amd64/crtend.o /usr/lib/amd64/crtn.o -m64 > >>>>> >> > -march=core2 -mtune=core2 -Wl,-soname -Wl,libmpirxx.so.3 -o > >>>>> >> > .libs/libmpirxx.so.3.1.4 > >>>>> >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/libstdc++.so: could > >>>>> >> > not read symbols: File in wrong format > >>>>> >> > collect2: ld returned 1 exit status > >>>>> >> > make[2]: *** [libmpirxx.la] Error 1 > >>>>> >> > make[2]: Leaving directory `/tmp/jason' > >>>>> >> > make[1]: *** [all-recursive] Error 1 > >>>>> >> > make[1]: Leaving directory `/tmp/jason' > >>>>> >> > make: *** [all] Error 2 > >>>>> >> > > >>>>> >> > either I tested it wrong before or some paths have changed on > >>>>> >> > fulvia. The other thing I notice is that it MUCH faster. > >>>>> >> > > >>>>> >> > Jason > >>>>> >> > > >>>>> >> > On Sunday 31 May 2009 12:37:55 Jason Moxham wrote: > >>>>> >> >> fulvia passes all tests now > >>>>> >> >> > >>>>> >> >> On Sunday 31 May 2009 02:46:32 Jason Moxham wrote: > >>>>> >> >> > I do a test run now and see if it passes with that , why is > >>>>> >> >> > fulvia so SLOW ?? takes about an ~hour to build with 4 > >>>>> >> >> > threads > >>>>> >> >> > > >>>>> >> >> > On Sunday 31 May 2009 02:28:28 Bill Hart wrote: > >>>>> >> >> > > In that case it should be sufficient to pass CFLAGS=-m64 to > >>>>> >> >> > > configure. > >>>>> >> >> > > > >>>>> >> >> > > 2009/5/31 Jason Moxham <[email protected]>: > >>>>> >> >> > > > You are right > >>>>> >> >> > > > > >>>>> >> >> > > > when we select build=none we get ABI=long not ABI=64 > >>>>> >> >> > > > so that the compiler options are none rather than -m64 > >>>>> >> >> > > > this works with gcc and cc on all other machines , sparc > >>>>> >> >> > > > Solaris included , darwin apple !!! (shock horror) , > >>>>> >> >> > > > just not on fulvia!!! > >>>>> >> >> > > > > >>>>> >> >> > > > On Sunday 31 May 2009 02:04:28 Bill Hart wrote: > >>>>> >> >> > > >> Hopefully Mariah has some idea about this. I don't see > >>>>> >> >> > > >> why that wouldn't compile, except that perhaps it needs > >>>>> >> >> > > >> a -m64 or something like that. > >>>>> >> >> > > >> > >>>>> >> >> > > >> Bill. > >>>>> >> >> > > >> > >>>>> >> >> > > >> 2009/5/31 Jason Moxham <[email protected]>: > >>>>> >> >> > > >> > compiling > >>>>> >> >> > > >> > > >>>>> >> >> > > >> > int main (void) { return 0; } > >>>>> >> >> > > >> > > >>>>> >> >> > > >> > with > >>>>> >> >> > > >> > gcc crap.cc && ./a.out > >>>>> >> >> > > >> > is fine > >>>>> >> >> > > >> > > >>>>> >> >> > > >> > but > >>>>> >> >> > > >> > g++ crap.cc && ./a.out > >>>>> >> >> > > >> > libc.so.1: a.out: > >>>>> >> >> > > >> > fatal: > >>>>> >> >> > > >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/amd64/libs > >>>>> >> >> > > >> >tdc++. so. 6: wrong ELF class: ELFCLASS64 > >>>>> >> >> > > >> > Killed > >>>>> >> >> > > >> > > >>>>> >> >> > > >> > which is what configure basically trys to do > >>>>> >> >> > > >> > > >>>>> >> >> > > >> > not sure why it doesn't happen when we just have > >>>>> >> >> > > >> > --enable-cxx and no build=none > >>>>> >> >> > > >> > > >>>>> >> >> > > >> > On Sunday 31 May 2009 01:44:57 Bill Hart wrote: > >>>>> >> >> > > >> >> What does config.log say went wrong? > >>>>> >> >> > > >> >> > >>>>> >> >> > > >> >> 2009/5/31 Jason Moxham <[email protected]>: > >>>>> >> >> > > >> >> > ./configure --enable-cxx --build=none > >>>>> >> >> > > >> >> > fails on fulvia with > >>>>> >> >> > > >> >> > > >>>>> >> >> > > >> >> > checking build system type... none-none-none > >>>>> >> >> > > >> >> > checking host system type... none-none-none > >>>>> >> >> > > >> >> > checking for a BSD-compatible > >>>>> >> >> > > >> >> > install... > >>>>> >> >> > > >> >> > /home/jasonmoxham/mpir/mpir/trunk/install-sh -c > >>>>> >> >> > > >> >> > checking whether build environment is sane... yes > >>>>> >> >> > > >> >> > checking for gawk... no > >>>>> >> >> > > >> >> > checking for mawk... no > >>>>> >> >> > > >> >> > checking for nawk... nawk > >>>>> >> >> > > >> >> > checking whether make sets $(MAKE)... yes > >>>>> >> >> > > >> >> > checking whether to enable maintainer-specific > >>>>> >> >> > > >> >> > portions of Makefiles... no checking ABI=long > >>>>> >> >> > > >> >> > checking compiler gcc -O3 -DNO_ASM... yes > >>>>> >> >> > > >> >> > checking for gcc... gcc > >>>>> >> >> > > >> >> > checking for C compiler default output file name... > >>>>> >> >> > > >> >> > a.out checking whether the C compiler works... yes > >>>>> >> >> > > >> >> > checking whether we are cross compiling... no > >>>>> >> >> > > >> >> > checking for suffix of executables... > >>>>> >> >> > > >> >> > checking for suffix of object files... o > >>>>> >> >> > > >> >> > checking whether we are using the GNU C compiler... > >>>>> >> >> > > >> >> > yes checking whether gcc accepts -g... yes > >>>>> >> >> > > >> >> > checking for gcc option to accept ISO C89... none > >>>>> >> >> > > >> >> > needed checking for gcc option to accept ISO C99... > >>>>> >> >> > > >> >> > -std=gnu99 checking for gcc -std=gnu99 option to > >>>>> >> >> > > >> >> > accept ISO Standard C... (cached) -std=gnu99 > >>>>> >> >> > > >> >> > checking how to run the C preprocessor... gcc > >>>>> >> >> > > >> >> > -std=gnu99 -E checking build system compiler gcc > >>>>> >> >> > > >> >> > -std=gnu99... yes checking for build system > >>>>> >> >> > > >> >> > preprocessor... gcc -std=gnu99 -E checking for > >>>>> >> >> > > >> >> > build system executable suffix... checking whether > >>>>> >> >> > > >> >> > build system compiler is ANSI... yes checking for > >>>>> >> >> > > >> >> > build system compiler math library... -lm checking > >>>>> >> >> > > >> >> > for g++... g++ > >>>>> >> >> > > >> >> > checking whether we are using the GNU C++ > >>>>> >> >> > > >> >> > compiler... yes checking whether g++ accepts -g... > >>>>> >> >> > > >> >> > yes > >>>>> >> >> > > >> >> > checking C++ compiler g++ -DNO_ASM -O3... no, > >>>>> >> >> > > >> >> > program does not run checking C++ compiler g++ > >>>>> >> >> > > >> >> > -DNO_ASM -g -O2... no, program does not run > >>>>> >> >> > > >> >> > configure: error: C++ compiler not available, see > >>>>> >> >> > > >> >> > config.log for details > >>>>> >> >> > > >> >> > > >>>>> >> >> > > >> >> > The options works fine on thier own > >>>>> >> >> > > >> >> > > >>>>> >> >> > > >> >> > I've opened a trac ticket for this > >>>>> >> >> > > >> >> > This fails with the current mpir-1.1.2 as well > >>>>> >> >> > > >> >> > In case your wondering why you may want build=none > >>>>> >> >> > > >> >> > , its to get all the asserts for maximum debugging > >>>>> >> >> > > >> >> > > >>>>> >> >> > > >> >> > Jason > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "mpir-devel" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/mpir-devel?hl=en -~----------~----~----~----~------~----~------~--~---
