I retested fulvia again for all the usual builds/gcc/cc etc and it passed. I still waiting for mark2 to finish the same , and still waiting for mark to finish the FFT tuning
I going to try FFT tuning on varro again, 2nd time lucky!! Jason On Monday 01 June 2009 15:31:52 Jason Moxham wrote: > I reran autotools and that fixes the problem :) > > The problem may not be with autotools but the gmp configure script , which > I *guess* is put together by people who hate it , ie us :) > > Better use slackware , so old , it will run stonehenge > > http://www.earthview.com/ages/stonehenge.htm > > On Monday 01 June 2009 15:19:01 Bill Hart wrote: > > The ones shipped with Ubuntu and SUSE both seem broken (in different > > ways). > > > > Bill. > > > > 2009/6/1 Jason Moxham <[email protected]>: > > > On Monday 01 June 2009 15:13:29 Bill Hart wrote: > > >> Revision 2070 builds with --enable-cxx and passes. > > >> > > >> Probably if you check out revision 2071, run aclocal, autoheader, > > >> autoconf, automake, etc it will all be ok again. > > >> > > >> You'll have to add back in your sparc64 tuning and in Makefile.am > > >> change mpirbench.sln to build.vc9 as this file has now moved inside > > >> the directory. > > >> > > >> I thought I had finally found an autotools which didn't cause a > > >> problem, but apparently not. > > > > > > I use autotools from slackware(32bit) or bluewhite(64bit) v12.1 (not > > > latest) > > > > > >> Bill. > > >> > > >> 2009/6/1 Bill Hart <[email protected]>: > > >> > OK, I get the same issue now. But it was only when I built with > > >> > --enable-cxx. It does seem that libtool doesn't recognise the object > > >> > files as output by the C++ compiler or something. > > >> > > > >> > It could be because I updated autotools, but it could also be > > >> > something has changed on the machine. > > >> > > > >> > I'll try reverting to an earlier revision and see if the problem > > >> > goes away. > > >> > > > >> > Bill. > > >> > > > >> > 2009/6/1 Bill Hart <[email protected]>: > > >> >> I did get this when attempting to run configure: > > >> >> > > >> >> -bash: ./configure: /bin/sh: bad interpreter: Stale NFS file handle > > >> >> > > >> >> Looks like the NFS filesystem might be a bit flakey on that > > >> >> machine. > > >> >> > > >> >> Bill. > > >> >> > > >> >> 2009/6/1 Bill Hart <[email protected]>: > > >> >>> I had no problems on fulvia with gcc-4.4.0. But I'm using a > > >> >>> version of mpir-1.2 from before when I did > > >> >>> > > >> >>> aclocal > > >> >>> autoheader > > >> >>> autoconf > > >> >>> automake > > >> >>> makeinfo > > >> >>> configure > > >> >>> > > >> >>> I'll try again by checking out trunk and see if I get the error. > > >> >>> If so, you might have to run your autotools, as I'll have again > > >> >>> found another broken autotools installation. > > >> >>> > > >> >>> Bill. > > >> >>> > > >> >>> 2009/6/1 Jason Moxham <[email protected]>: > > >> >>>> we now have the same failure on mark , clearly something has > > >> >>>> changed > > >> >>>> > > >> >>>> On Monday 01 June 2009 13:38:31 Bill Hart wrote: > > >> >>>>> Great. Just keep committing to trunk. We're not at an rc yet, so > > >> >>>>> no need to create the branch yet. > > >> >>>>> > > >> >>>>> I'm going to try and see if I have anything to offer the Windows > > >> >>>>> timing code which seems to be playing up terribly and if not > > >> >>>>> start testing on other build farm systems. > > >> >>>>> > > >> >>>>> Bill. > > >> >>>>> > > >> >>>>> 2009/6/1 Jason Moxham <[email protected]>: > > >> >>>>> > On Monday 01 June 2009 13:19:53 Bill Hart wrote: > > >> >>>>> >> Does it work if you do not use parallel make? > > >> >>>>> > > > >> >>>>> > no change, I have look in an hour or so , I'm also retesting > > >> >>>>> > mark2 , make sure nothing has changed there, The fft tuning on > > >> >>>>> > mark should be finished in an hour or two. > > >> >>>>> > > > >> >>>>> > Jason > > >> >>>>> > > > >> >>>>> >> 2009/6/1 Jason Moxham <[email protected]>: > > >> >>>>> >> > Something has changed ? > > >> >>>>> >> > > > >> >>>>> >> > Fulvia now fails again , with different options > > >> >>>>> >> > > > >> >>>>> >> > ./configure --enable-cxx && make -j 4 && make -j 4 check > > >> >>>>> >> > > > >> >>>>> >> > ranlib .libs/libmpir.a > > >> >>>>> >> > rm -fr .libs/libmpir.lax > > >> >>>>> >> > creating libmpir.la > > >> >>>>> >> > (cd .libs && rm -f libmpir.la && ln -s ../libmpir.la > > >> >>>>> >> > libmpir.la) /bin/bash ./libtool --tag=CXX --mode=link > > >> >>>>> >> > g++ -O2 -m64 -march=core2 -mtune=core2 -o > > >> >>>>> >> > libmpirxx.la -rpath /usr/local/lib -version-info 4:4:1 > > >> >>>>> >> > dummy.lo cxx/isfuns.lo cxx/ismpf.lo cxx/ismpq.lo > > >> >>>>> >> > cxx/ismpz.lo cxx/ismpznw.lo cxx/osdoprnti.lo cxx/osfuns.lo > > >> >>>>> >> > cxx/osmpf.lo cxx/osmpq.lo cxx/osmpz.lo libmpir.la > > >> >>>>> >> > g++ -shared -nostdlib /usr/lib/amd64/crti.o > > >> >>>>> >> > /usr/lib/amd64/values-Xa.o > > >> >>>>> >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-pc-sol > > >> >>>>> >> >ar is2 .10/4. 4.0 /amd64/crtbegin.o .libs/dummy.o > > >> >>>>> >> > cxx/.libs/isfuns.o cxx/.libs/ismpf.o cxx/.libs/ismpq.o > > >> >>>>> >> > cxx/.libs/ismpz.o cxx/.libs/ismpznw.o > > >> >>>>> >> > cxx/.libs/osdoprnti.o cxx/.libs/osfuns.o > > >> >>>>> >> > cxx/.libs/osmpf.o cxx/.libs/osmpq.o > > >> >>>>> >> > cxx/.libs/osmpz.o -Wl,--rpath -Wl,/tmp/jason/.libs > > >> >>>>> >> > -Wl,--rpath -Wl,/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib > > >> >>>>> >> > -Wl,--rpath -Wl,/usr/local/lib -Wl,--rpath > > >> >>>>> >> > -Wl,/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib > > >> >>>>> >> > ./.libs/libmpir.so > > >> >>>>> >> > -L/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-pc-s > > >> >>>>> >> >ol ari s2.10/ 4.4 .0/amd64 > > >> >>>>> >> > -L/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-pc-s > > >> >>>>> >> >ol ari s2.10/ 4.4 .0/../../../amd64 -L/lib/amd64 > > >> >>>>> >> > -L/usr/lib/amd64 > > >> >>>>> >> > -L/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-pc-s > > >> >>>>> >> >ol ari s2.10/ 4.4 .0 > > >> >>>>> >> > -L/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-pc-s > > >> >>>>> >> >ol ari s2.10/ 4.4 .0/../../.. > > >> >>>>> >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/libstdc++.so > > >> >>>>> >> > -lm -lgcc_s > > >> >>>>> >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-pc-sol > > >> >>>>> >> >ar is2 .10/4. 4.0 /amd64/crtend.o /usr/lib/amd64/crtn.o > > >> >>>>> >> > -m64 -march=core2 -mtune=core2 -Wl,-soname > > >> >>>>> >> > -Wl,libmpirxx.so.3 -o .libs/libmpirxx.so.3.1.4 > > >> >>>>> >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/libstdc++.so: > > >> >>>>> >> > could not read symbols: File in wrong format > > >> >>>>> >> > collect2: ld returned 1 exit status > > >> >>>>> >> > make[2]: *** [libmpirxx.la] Error 1 > > >> >>>>> >> > make[2]: Leaving directory `/tmp/jason' > > >> >>>>> >> > make[1]: *** [all-recursive] Error 1 > > >> >>>>> >> > make[1]: Leaving directory `/tmp/jason' > > >> >>>>> >> > make: *** [all] Error 2 > > >> >>>>> >> > > > >> >>>>> >> > either I tested it wrong before or some paths have changed > > >> >>>>> >> > on fulvia. The other thing I notice is that it MUCH faster. > > >> >>>>> >> > > > >> >>>>> >> > Jason > > >> >>>>> >> > > > >> >>>>> >> > On Sunday 31 May 2009 12:37:55 Jason Moxham wrote: > > >> >>>>> >> >> fulvia passes all tests now > > >> >>>>> >> >> > > >> >>>>> >> >> On Sunday 31 May 2009 02:46:32 Jason Moxham wrote: > > >> >>>>> >> >> > I do a test run now and see if it passes with that , why > > >> >>>>> >> >> > is fulvia so SLOW ?? takes about an ~hour to build with > > >> >>>>> >> >> > 4 threads > > >> >>>>> >> >> > > > >> >>>>> >> >> > On Sunday 31 May 2009 02:28:28 Bill Hart wrote: > > >> >>>>> >> >> > > In that case it should be sufficient to pass > > >> >>>>> >> >> > > CFLAGS=-m64 to configure. > > >> >>>>> >> >> > > > > >> >>>>> >> >> > > 2009/5/31 Jason Moxham <[email protected]>: > > >> >>>>> >> >> > > > You are right > > >> >>>>> >> >> > > > > > >> >>>>> >> >> > > > when we select build=none we get ABI=long not ABI=64 > > >> >>>>> >> >> > > > so that the compiler options are none rather than > > >> >>>>> >> >> > > > -m64 this works with gcc and cc on all other > > >> >>>>> >> >> > > > machines , sparc Solaris included , darwin apple !!! > > >> >>>>> >> >> > > > (shock horror) , just not on fulvia!!! > > >> >>>>> >> >> > > > > > >> >>>>> >> >> > > > On Sunday 31 May 2009 02:04:28 Bill Hart wrote: > > >> >>>>> >> >> > > >> Hopefully Mariah has some idea about this. I don't > > >> >>>>> >> >> > > >> see why that wouldn't compile, except that perhaps > > >> >>>>> >> >> > > >> it needs a -m64 or something like that. > > >> >>>>> >> >> > > >> > > >> >>>>> >> >> > > >> Bill. > > >> >>>>> >> >> > > >> > > >> >>>>> >> >> > > >> 2009/5/31 Jason Moxham <[email protected]>: > > >> >>>>> >> >> > > >> > compiling > > >> >>>>> >> >> > > >> > > > >> >>>>> >> >> > > >> > int main (void) { return 0; } > > >> >>>>> >> >> > > >> > > > >> >>>>> >> >> > > >> > with > > >> >>>>> >> >> > > >> > gcc crap.cc && ./a.out > > >> >>>>> >> >> > > >> > is fine > > >> >>>>> >> >> > > >> > > > >> >>>>> >> >> > > >> > but > > >> >>>>> >> >> > > >> > g++ crap.cc && ./a.out > > >> >>>>> >> >> > > >> > libc.so.1: a.out: > > >> >>>>> >> >> > > >> > fatal: > > >> >>>>> >> >> > > >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/amd64 > > >> >>>>> >> >> > > >> >/l ibs tdc++. so. 6: wrong ELF class: ELFCLASS64 > > >> >>>>> >> >> > > >> > Killed > > >> >>>>> >> >> > > >> > > > >> >>>>> >> >> > > >> > which is what configure basically trys to do > > >> >>>>> >> >> > > >> > > > >> >>>>> >> >> > > >> > not sure why it doesn't happen when we just have > > >> >>>>> >> >> > > >> > --enable-cxx and no build=none > > >> >>>>> >> >> > > >> > > > >> >>>>> >> >> > > >> > On Sunday 31 May 2009 01:44:57 Bill Hart wrote: > > >> >>>>> >> >> > > >> >> What does config.log say went wrong? > > >> >>>>> >> >> > > >> >> > > >> >>>>> >> >> > > >> >> 2009/5/31 Jason Moxham <[email protected]>: > > >> >>>>> >> >> > > >> >> > ./configure --enable-cxx --build=none > > >> >>>>> >> >> > > >> >> > fails on fulvia with > > >> >>>>> >> >> > > >> >> > > > >> >>>>> >> >> > > >> >> > checking build system type... none-none-none > > >> >>>>> >> >> > > >> >> > checking host system type... none-none-none > > >> >>>>> >> >> > > >> >> > checking for a BSD-compatible > > >> >>>>> >> >> > > >> >> > install... > > >> >>>>> >> >> > > >> >> > /home/jasonmoxham/mpir/mpir/trunk/install-sh > > >> >>>>> >> >> > > >> >> > -c checking whether build environment is > > >> >>>>> >> >> > > >> >> > sane... yes checking for gawk... no > > >> >>>>> >> >> > > >> >> > checking for mawk... no > > >> >>>>> >> >> > > >> >> > checking for nawk... nawk > > >> >>>>> >> >> > > >> >> > checking whether make sets $(MAKE)... yes > > >> >>>>> >> >> > > >> >> > checking whether to enable maintainer-specific > > >> >>>>> >> >> > > >> >> > portions of Makefiles... no checking ABI=long > > >> >>>>> >> >> > > >> >> > checking compiler gcc -O3 -DNO_ASM... yes > > >> >>>>> >> >> > > >> >> > checking for gcc... gcc > > >> >>>>> >> >> > > >> >> > checking for C compiler default output file > > >> >>>>> >> >> > > >> >> > name... a.out checking whether the C compiler > > >> >>>>> >> >> > > >> >> > works... yes checking whether we are cross > > >> >>>>> >> >> > > >> >> > compiling... no checking for suffix of > > >> >>>>> >> >> > > >> >> > executables... > > >> >>>>> >> >> > > >> >> > checking for suffix of object files... o > > >> >>>>> >> >> > > >> >> > checking whether we are using the GNU C > > >> >>>>> >> >> > > >> >> > compiler... yes checking whether gcc accepts > > >> >>>>> >> >> > > >> >> > -g... yes checking for gcc option to accept > > >> >>>>> >> >> > > >> >> > ISO C89... none needed checking for gcc option > > >> >>>>> >> >> > > >> >> > to accept ISO C99... -std=gnu99 checking for > > >> >>>>> >> >> > > >> >> > gcc -std=gnu99 option to accept ISO Standard > > >> >>>>> >> >> > > >> >> > C... (cached) -std=gnu99 checking how to run > > >> >>>>> >> >> > > >> >> > the C preprocessor... gcc -std=gnu99 -E > > >> >>>>> >> >> > > >> >> > checking build system compiler gcc > > >> >>>>> >> >> > > >> >> > -std=gnu99... yes checking for build system > > >> >>>>> >> >> > > >> >> > preprocessor... gcc -std=gnu99 -E checking for > > >> >>>>> >> >> > > >> >> > build system executable suffix... checking > > >> >>>>> >> >> > > >> >> > whether build system compiler is ANSI... yes > > >> >>>>> >> >> > > >> >> > checking for build system compiler math > > >> >>>>> >> >> > > >> >> > library... -lm checking for g++... g++ > > >> >>>>> >> >> > > >> >> > checking whether we are using the GNU C++ > > >> >>>>> >> >> > > >> >> > compiler... yes checking whether g++ accepts > > >> >>>>> >> >> > > >> >> > -g... yes > > >> >>>>> >> >> > > >> >> > checking C++ compiler g++ -DNO_ASM -O3... no, > > >> >>>>> >> >> > > >> >> > program does not run checking C++ compiler g++ > > >> >>>>> >> >> > > >> >> > -DNO_ASM -g -O2... no, program does not run > > >> >>>>> >> >> > > >> >> > configure: error: C++ compiler not available, > > >> >>>>> >> >> > > >> >> > see config.log for details > > >> >>>>> >> >> > > >> >> > > > >> >>>>> >> >> > > >> >> > The options works fine on thier own > > >> >>>>> >> >> > > >> >> > > > >> >>>>> >> >> > > >> >> > I've opened a trac ticket for this > > >> >>>>> >> >> > > >> >> > This fails with the current mpir-1.1.2 as well > > >> >>>>> >> >> > > >> >> > In case your wondering why you may want > > >> >>>>> >> >> > > >> >> > build=none , its to get all the asserts for > > >> >>>>> >> >> > > >> >> > maximum debugging > > >> >>>>> >> >> > > >> >> > > > >> >>>>> >> >> > > >> >> > Jason > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "mpir-devel" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/mpir-devel?hl=en -~----------~----~----~----~------~----~------~--~---
