In common.c I changed t and t_unsorted to be arrays of length 100 instead of 30. This appears to allow me to get tuning values for this machine.
Bill. 2009/6/2 Bill Hart <[email protected]>: > There's no point doing FFT tuning on this machine. Times vary by more > than a factor of 2. I'll just produce ordinary make tune values. > > Bill. > > 2009/6/2 Bill Hart <[email protected]>: >> It passes make check, but timings are so erratic I'm unable to get >> ordinary make tune values. I've set the precision to 20000000 and it >> still occasionally drops out and it takes forever. >> >> Bill. >> >> 2009/6/2 Jason Moxham <[email protected]>: >>> >>> I may be able to do netburst as I have occasional access, , I'll see if I >>> can >>> get acces. I see if I can figure out the timing on cato(mips64) as well. >>> >>> >>> On Tuesday 02 June 2009 13:29:33 Bill Hart wrote: >>>> That only leaves netburst, netburstlahf, atom, mips64 and windows >>>> tuning values to get, which I will do asap. So far Brian and I still >>>> have no idea why the timing code on Windows is so erratic. Tuning is >>>> currently impossible there. We may have to ship without it if we >>>> cannot resolve the issues in the next day or two. Unfortunately I only >>>> have 32 bit Windows and VS Express, so I am currently of little help. >>>> >>>> Bill. >>>> >>>> 2009/6/2 Jason Moxham <[email protected]>: >>>> > Mark2 passes all tests now , and we have done the fft tuning on mark and >>>> > varro >>>> > >>>> > I can't reproduce the weird libgcc error on mark , I suspose I was typing >>>> > something wrong :( >>>> > >>>> > On Monday 01 June 2009 18:08:26 Jason Moxham wrote: >>>> >> I retested fulvia again for all the usual builds/gcc/cc etc and it >>>> >> passed. I still waiting for mark2 to finish the same , and still waiting >>>> >> for mark to finish the FFT tuning >>>> >> >>>> >> I going to try FFT tuning on varro again, 2nd time lucky!! >>>> >> >>>> >> Jason >>>> >> >>>> >> On Monday 01 June 2009 15:31:52 Jason Moxham wrote: >>>> >> > I reran autotools and that fixes the problem :) >>>> >> > >>>> >> > The problem may not be with autotools but the gmp configure script , >>>> >> > which I *guess* is put together by people who hate it , ie us :) >>>> >> > >>>> >> > Better use slackware , so old , it will run stonehenge >>>> >> > >>>> >> > http://www.earthview.com/ages/stonehenge.htm >>>> >> > >>>> >> > On Monday 01 June 2009 15:19:01 Bill Hart wrote: >>>> >> > > The ones shipped with Ubuntu and SUSE both seem broken (in different >>>> >> > > ways). >>>> >> > > >>>> >> > > Bill. >>>> >> > > >>>> >> > > 2009/6/1 Jason Moxham <[email protected]>: >>>> >> > > > On Monday 01 June 2009 15:13:29 Bill Hart wrote: >>>> >> > > >> Revision 2070 builds with --enable-cxx and passes. >>>> >> > > >> >>>> >> > > >> Probably if you check out revision 2071, run aclocal, autoheader, >>>> >> > > >> autoconf, automake, etc it will all be ok again. >>>> >> > > >> >>>> >> > > >> You'll have to add back in your sparc64 tuning and in Makefile.am >>>> >> > > >> change mpirbench.sln to build.vc9 as this file has now moved >>>> >> > > >> inside the directory. >>>> >> > > >> >>>> >> > > >> I thought I had finally found an autotools which didn't cause a >>>> >> > > >> problem, but apparently not. >>>> >> > > > >>>> >> > > > I use autotools from slackware(32bit) or bluewhite(64bit) v12.1 >>>> >> > > > (not latest) >>>> >> > > > >>>> >> > > >> Bill. >>>> >> > > >> >>>> >> > > >> 2009/6/1 Bill Hart <[email protected]>: >>>> >> > > >> > OK, I get the same issue now. But it was only when I built with >>>> >> > > >> > --enable-cxx. It does seem that libtool doesn't recognise the >>>> >> > > >> > object files as output by the C++ compiler or something. >>>> >> > > >> > >>>> >> > > >> > It could be because I updated autotools, but it could also be >>>> >> > > >> > something has changed on the machine. >>>> >> > > >> > >>>> >> > > >> > I'll try reverting to an earlier revision and see if the >>>> >> > > >> > problem goes away. >>>> >> > > >> > >>>> >> > > >> > Bill. >>>> >> > > >> > >>>> >> > > >> > 2009/6/1 Bill Hart <[email protected]>: >>>> >> > > >> >> I did get this when attempting to run configure: >>>> >> > > >> >> >>>> >> > > >> >> -bash: ./configure: /bin/sh: bad interpreter: Stale NFS file >>>> >> > > >> >> handle >>>> >> > > >> >> >>>> >> > > >> >> Looks like the NFS filesystem might be a bit flakey on that >>>> >> > > >> >> machine. >>>> >> > > >> >> >>>> >> > > >> >> Bill. >>>> >> > > >> >> >>>> >> > > >> >> 2009/6/1 Bill Hart <[email protected]>: >>>> >> > > >> >>> I had no problems on fulvia with gcc-4.4.0. But I'm using a >>>> >> > > >> >>> version of mpir-1.2 from before when I did >>>> >> > > >> >>> >>>> >> > > >> >>> aclocal >>>> >> > > >> >>> autoheader >>>> >> > > >> >>> autoconf >>>> >> > > >> >>> automake >>>> >> > > >> >>> makeinfo >>>> >> > > >> >>> configure >>>> >> > > >> >>> >>>> >> > > >> >>> I'll try again by checking out trunk and see if I get the >>>> >> > > >> >>> error. If so, you might have to run your autotools, as I'll >>>> >> > > >> >>> have again found another broken autotools installation. >>>> >> > > >> >>> >>>> >> > > >> >>> Bill. >>>> >> > > >> >>> >>>> >> > > >> >>> 2009/6/1 Jason Moxham <[email protected]>: >>>> >> > > >> >>>> we now have the same failure on mark , clearly something has >>>> >> > > >> >>>> changed >>>> >> > > >> >>>> >>>> >> > > >> >>>> On Monday 01 June 2009 13:38:31 Bill Hart wrote: >>>> >> > > >> >>>>> Great. Just keep committing to trunk. We're not at an rc >>>> >> > > >> >>>>> yet, so no need to create the branch yet. >>>> >> > > >> >>>>> >>>> >> > > >> >>>>> I'm going to try and see if I have anything to offer the >>>> >> > > >> >>>>> Windows timing code which seems to be playing up terribly >>>> >> > > >> >>>>> and if not start testing on other build farm systems. >>>> >> > > >> >>>>> >>>> >> > > >> >>>>> Bill. >>>> >> > > >> >>>>> >>>> >> > > >> >>>>> 2009/6/1 Jason Moxham <[email protected]>: >>>> >> > > >> >>>>> > On Monday 01 June 2009 13:19:53 Bill Hart wrote: >>>> >> > > >> >>>>> >> Does it work if you do not use parallel make? >>>> >> > > >> >>>>> > >>>> >> > > >> >>>>> > no change, I have look in an hour or so , I'm also >>>> >> > > >> >>>>> > retesting mark2 , make sure nothing has changed there, >>>> >> > > >> >>>>> > The fft tuning on mark should be finished in an hour or >>>> >> > > >> >>>>> > two. >>>> >> > > >> >>>>> > >>>> >> > > >> >>>>> > Jason >>>> >> > > >> >>>>> > >>>> >> > > >> >>>>> >> 2009/6/1 Jason Moxham <[email protected]>: >>>> >> > > >> >>>>> >> > Something has changed ? >>>> >> > > >> >>>>> >> > >>>> >> > > >> >>>>> >> > Fulvia now fails again , with different options >>>> >> > > >> >>>>> >> > >>>> >> > > >> >>>>> >> > ./configure --enable-cxx && make -j 4 && make -j 4 >>>> >> > > >> >>>>> >> > check >>>> >> > > >> >>>>> >> > >>>> >> > > >> >>>>> >> > ranlib .libs/libmpir.a >>>> >> > > >> >>>>> >> > rm -fr .libs/libmpir.lax >>>> >> > > >> >>>>> >> > creating libmpir.la >>>> >> > > >> >>>>> >> > (cd .libs && rm -f libmpir.la && ln -s ../libmpir.la >>>> >> > > >> >>>>> >> > libmpir.la) /bin/bash ./libtool --tag=CXX --mode=link >>>> >> > > >> >>>>> >> > g++ -O2 -m64 -march=core2 -mtune=core2 -o >>>> >> > > >> >>>>> >> > libmpirxx.la -rpath /usr/local/lib -version-info >>>> >> > > >> >>>>> >> > 4:4:1 dummy.lo cxx/isfuns.lo cxx/ismpf.lo cxx/ismpq.lo >>>> >> > > >> >>>>> >> > cxx/ismpz.lo cxx/ismpznw.lo cxx/osdoprnti.lo >>>> >> > > >> >>>>> >> > cxx/osfuns.lo cxx/osmpf.lo cxx/osmpq.lo cxx/osmpz.lo >>>> >> > > >> >>>>> >> > libmpir.la g++ -shared -nostdlib /usr/lib/amd64/crti.o >>>> >> > > >> >>>>> >> > /usr/lib/amd64/values-Xa.o >>>> >> > > >> >>>>> >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-p >>>> >> > > >> >>>>> >> >c-s ol ar is2 .10/4. 4.0 /amd64/crtbegin.o >>>> >> > > >> >>>>> >> > .libs/dummy.o cxx/.libs/isfuns.o cxx/.libs/ismpf.o >>>> >> > > >> >>>>> >> > cxx/.libs/ismpq.o cxx/.libs/ismpz.o >>>> >> > > >> >>>>> >> > cxx/.libs/ismpznw.o >>>> >> > > >> >>>>> >> > cxx/.libs/osdoprnti.o cxx/.libs/osfuns.o >>>> >> > > >> >>>>> >> > cxx/.libs/osmpf.o cxx/.libs/osmpq.o >>>> >> > > >> >>>>> >> > cxx/.libs/osmpz.o -Wl,--rpath -Wl,/tmp/jason/.libs >>>> >> > > >> >>>>> >> > -Wl,--rpath >>>> >> > > >> >>>>> >> > -Wl,/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib >>>> >> > > >> >>>>> >> > -Wl,--rpath -Wl,/usr/local/lib -Wl,--rpath >>>> >> > > >> >>>>> >> > -Wl,/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib >>>> >> > > >> >>>>> >> > ./.libs/libmpir.so >>>> >> > > >> >>>>> >> > -L/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386 >>>> >> > > >> >>>>> >> >-pc -s ol ari s2.10/ 4.4 .0/amd64 >>>> >> > > >> >>>>> >> > -L/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386 >>>> >> > > >> >>>>> >> >-pc -s ol ari s2.10/ 4.4 .0/../../../amd64 -L/lib/amd64 >>>> >> > > >> >>>>> >> > -L/usr/lib/amd64 >>>> >> > > >> >>>>> >> > -L/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386 >>>> >> > > >> >>>>> >> >-pc -s ol ari s2.10/ 4.4 .0 >>>> >> > > >> >>>>> >> > -L/usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386 >>>> >> > > >> >>>>> >> >-pc -s ol ari s2.10/ 4.4 .0/../../.. >>>> >> > > >> >>>>> >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/libstdc++. >>>> >> > > >> >>>>> >> >so -lm -lgcc_s >>>> >> > > >> >>>>> >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/gcc/i386-p >>>> >> > > >> >>>>> >> >c-s ol ar is2 .10/4. 4.0 /amd64/crtend.o >>>> >> > > >> >>>>> >> > /usr/lib/amd64/crtn.o -m64 -march=core2 -mtune=core2 >>>> >> > > >> >>>>> >> > -Wl,-soname >>>> >> > > >> >>>>> >> > -Wl,libmpirxx.so.3 -o .libs/libmpirxx.so.3.1.4 >>>> >> > > >> >>>>> >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/libstdc++. >>>> >> > > >> >>>>> >> >so: could not read symbols: File in wrong format >>>> >> > > >> >>>>> >> > collect2: ld returned 1 exit status >>>> >> > > >> >>>>> >> > make[2]: *** [libmpirxx.la] Error 1 >>>> >> > > >> >>>>> >> > make[2]: Leaving directory `/tmp/jason' >>>> >> > > >> >>>>> >> > make[1]: *** [all-recursive] Error 1 >>>> >> > > >> >>>>> >> > make[1]: Leaving directory `/tmp/jason' >>>> >> > > >> >>>>> >> > make: *** [all] Error 2 >>>> >> > > >> >>>>> >> > >>>> >> > > >> >>>>> >> > either I tested it wrong before or some paths have >>>> >> > > >> >>>>> >> > changed on fulvia. The other thing I notice is that it >>>> >> > > >> >>>>> >> > MUCH faster. >>>> >> > > >> >>>>> >> > >>>> >> > > >> >>>>> >> > Jason >>>> >> > > >> >>>>> >> > >>>> >> > > >> >>>>> >> > On Sunday 31 May 2009 12:37:55 Jason Moxham wrote: >>>> >> > > >> >>>>> >> >> fulvia passes all tests now >>>> >> > > >> >>>>> >> >> >>>> >> > > >> >>>>> >> >> On Sunday 31 May 2009 02:46:32 Jason Moxham wrote: >>>> >> > > >> >>>>> >> >> > I do a test run now and see if it passes with that >>>> >> > > >> >>>>> >> >> > , why is fulvia so SLOW ?? takes about an ~hour to >>>> >> > > >> >>>>> >> >> > build with 4 threads >>>> >> > > >> >>>>> >> >> > >>>> >> > > >> >>>>> >> >> > On Sunday 31 May 2009 02:28:28 Bill Hart wrote: >>>> >> > > >> >>>>> >> >> > > In that case it should be sufficient to pass >>>> >> > > >> >>>>> >> >> > > CFLAGS=-m64 to configure. >>>> >> > > >> >>>>> >> >> > > >>>> >> > > >> >>>>> >> >> > > 2009/5/31 Jason Moxham >>> <[email protected]>: >>>> >> > > >> >>>>> >> >> > > > You are right >>>> >> > > >> >>>>> >> >> > > > >>>> >> > > >> >>>>> >> >> > > > when we select build=none we get ABI=long not >>>> >> > > >> >>>>> >> >> > > > ABI=64 so that the compiler options are none >>>> >> > > >> >>>>> >> >> > > > rather than -m64 this works with gcc and cc on >>>> >> > > >> >>>>> >> >> > > > all other machines , sparc Solaris included , >>>> >> > > >> >>>>> >> >> > > > darwin apple !!! (shock horror) , just not on >>>> >> > > >> >>>>> >> >> > > > fulvia!!! >>>> >> > > >> >>>>> >> >> > > > >>>> >> > > >> >>>>> >> >> > > > On Sunday 31 May 2009 02:04:28 Bill Hart wrote: >>>> >> > > >> >>>>> >> >> > > >> Hopefully Mariah has some idea about this. I >>>> >> > > >> >>>>> >> >> > > >> don't see why that wouldn't compile, except >>>> >> > > >> >>>>> >> >> > > >> that perhaps it needs a -m64 or something like >>>> >> > > >> >>>>> >> >> > > >> that. >>>> >> > > >> >>>>> >> >> > > >> >>>> >> > > >> >>>>> >> >> > > >> Bill. >>>> >> > > >> >>>>> >> >> > > >> >>>> >> > > >> >>>>> >> >> > > >> 2009/5/31 Jason Moxham >>>> > >>>> > <[email protected]>: >>>> >> > > >> >>>>> >> >> > > >> > compiling >>>> >> > > >> >>>>> >> >> > > >> > >>>> >> > > >> >>>>> >> >> > > >> > int main (void) { return 0; } >>>> >> > > >> >>>>> >> >> > > >> > >>>> >> > > >> >>>>> >> >> > > >> > with >>>> >> > > >> >>>>> >> >> > > >> > gcc crap.cc && ./a.out >>>> >> > > >> >>>>> >> >> > > >> > is fine >>>> >> > > >> >>>>> >> >> > > >> > >>>> >> > > >> >>>>> >> >> > > >> > but >>>> >> > > >> >>>>> >> >> > > >> > g++ crap.cc && ./a.out >>>> >> > > >> >>>>> >> >> > > >> > libc.so.1: a.out: >>>> >> > > >> >>>>> >> >> > > >> > fatal: >>>> >> > > >> >>>>> >> >> > > >> > /usr/local/gcc-4.4.0/x86_64-SunOS-core2/lib/ >>>> >> > > >> >>>>> >> >> > > >> >amd 64 /l ibs tdc++. so. 6: wrong ELF class: >>>> >> > > >> >>>>> >> >> > > >> > ELFCLASS64 Killed >>>> >> > > >> >>>>> >> >> > > >> > >>>> >> > > >> >>>>> >> >> > > >> > which is what configure basically trys to do >>>> >> > > >> >>>>> >> >> > > >> > >>>> >> > > >> >>>>> >> >> > > >> > not sure why it doesn't happen when we just >>>> >> > > >> >>>>> >> >> > > >> > have --enable-cxx and no build=none >>>> >> > > >> >>>>> >> >> > > >> > >>>> >> > > >> >>>>> >> >> > > >> > On Sunday 31 May 2009 01:44:57 Bill Hart >>> wrote: >>>> >> > > >> >>>>> >> >> > > >> >> What does config.log say went wrong? >>>> >> > > >> >>>>> >> >> > > >> >> >>>> >> > > >> >>>>> >> >> > > >> >> 2009/5/31 Jason Moxham >>>> >> >>>> >> <[email protected]>: >>>> >> > > >> >>>>> >> >> > > >> >> > ./configure --enable-cxx --build=none >>>> >> > > >> >>>>> >> >> > > >> >> > fails on fulvia with >>>> >> > > >> >>>>> >> >> > > >> >> > >>>> >> > > >> >>>>> >> >> > > >> >> > checking build system type... >>>> >> > > >> >>>>> >> >> > > >> >> > none-none-none checking host system >>>> >> > > >> >>>>> >> >> > > >> >> > type... none-none-none checking for a >>>> >> > > >> >>>>> >> >> > > >> >> > BSD-compatible >>>> >> > > >> >>>>> >> >> > > >> >> > install... >>>> >> > > >> >>>>> >> >> > > >> >> > /home/jasonmoxham/mpir/mpir/trunk/install >>>> >> > > >> >>>>> >> >> > > >> >> >-sh -c checking whether build environment >>>> >> > > >> >>>>> >> >> > > >> >> > is sane... yes checking for gawk... no >>>> >> > > >> >>>>> >> >> > > >> >> > checking for mawk... no >>>> >> > > >> >>>>> >> >> > > >> >> > checking for nawk... nawk >>>> >> > > >> >>>>> >> >> > > >> >> > checking whether make sets $(MAKE)... yes >>>> >> > > >> >>>>> >> >> > > >> >> > checking whether to enable >>>> >> > > >> >>>>> >> >> > > >> >> > maintainer-specific portions of >>>> >> > > >> >>>>> >> >> > > >> >> > Makefiles... no checking ABI=long >>>> >> > > >> >>>>> >> >> > > >> >> > checking compiler gcc -O3 -DNO_ASM... yes >>>> >> > > >> >>>>> >> >> > > >> >> > checking for gcc... gcc checking for C >>>> >> > > >> >>>>> >> >> > > >> >> > compiler default output file name... >>>> >> > > >> >>>>> >> >> > > >> >> > a.out checking whether the C compiler >>>> >> > > >> >>>>> >> >> > > >> >> > works... yes checking whether we are >>>> >> > > >> >>>>> >> >> > > >> >> > cross compiling... no checking for suffix >>>> >> > > >> >>>>> >> >> > > >> >> > of executables... >>>> >> > > >> >>>>> >> >> > > >> >> > checking for suffix of object files... o >>>> >> > > >> >>>>> >> >> > > >> >> > checking whether we are using the GNU C >>>> >> > > >> >>>>> >> >> > > >> >> > compiler... yes checking whether gcc >>>> >> > > >> >>>>> >> >> > > >> >> > accepts -g... yes checking for gcc option >>>> >> > > >> >>>>> >> >> > > >> >> > to accept ISO C89... none needed checking >>>> >> > > >> >>>>> >> >> > > >> >> > for gcc option to accept ISO C99... >>>> >> > > >> >>>>> >> >> > > >> >> > -std=gnu99 checking for gcc -std=gnu99 >>>> >> > > >> >>>>> >> >> > > >> >> > option to accept ISO Standard C... >>>> >> > > >> >>>>> >> >> > > >> >> > (cached) -std=gnu99 checking how to run >>>> >> > > >> >>>>> >> >> > > >> >> > the C preprocessor... gcc -std=gnu99 -E >>>> >> > > >> >>>>> >> >> > > >> >> > checking build system compiler gcc >>>> >> > > >> >>>>> >> >> > > >> >> > -std=gnu99... yes checking for build >>>> >> > > >> >>>>> >> >> > > >> >> > system preprocessor... gcc -std=gnu99 -E >>>> >> > > >> >>>>> >> >> > > >> >> > checking for build system executable >>>> >> > > >> >>>>> >> >> > > >> >> > suffix... checking whether build system >>>> >> > > >> >>>>> >> >> > > >> >> > compiler is ANSI... yes checking for >>>> >> > > >> >>>>> >> >> > > >> >> > build system compiler math library... -lm >>>> >> > > >> >>>>> >> >> > > >> >> > checking for g++... g++ checking whether >>>> >> > > >> >>>>> >> >> > > >> >> > we are using the GNU C++ compiler... yes >>>> >> > > >> >>>>> >> >> > > >> >> > checking whether g++ accepts -g... yes >>>> >> > > >> >>>>> >> >> > > >> >> > checking C++ compiler g++ -DNO_ASM -O3... >>>> >> > > >> >>>>> >> >> > > >> >> > no, program does not run checking C++ >>>> >> > > >> >>>>> >> >> > > >> >> > compiler g++ -DNO_ASM -g -O2... no, >>>> >> > > >> >>>>> >> >> > > >> >> > program does not run configure: error: >>>> >> > > >> >>>>> >> >> > > >> >> > C++ compiler not available, see >>>> >> > > >> >>>>> >> >> > > >> >> > config.log for details >>>> >> > > >> >>>>> >> >> > > >> >> > >>>> >> > > >> >>>>> >> >> > > >> >> > The options works fine on thier own >>>> >> > > >> >>>>> >> >> > > >> >> > >>>> >> > > >> >>>>> >> >> > > >> >> > I've opened a trac ticket for this >>>> >> > > >> >>>>> >> >> > > >> >> > This fails with the current mpir-1.1.2 as >>>> >> > > >> >>>>> >> >> > > >> >> > well In case your wondering why you may >>>> >> > > >> >>>>> >> >> > > >> >> > want build=none , its to get all the >>>> >> > > >> >>>>> >> >> > > >> >> > asserts for maximum debugging >>>> >> > > >> >>>>> >> >> > > >> >> > >>>> >> > > >> >>>>> >> >> > > >> >> > Jason >>>> >>>> >>> >>> >>> >>> >>> >> > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "mpir-devel" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/mpir-devel?hl=en -~----------~----~----~----~------~----~------~--~---
