Did you setup the PIX to allow polling from the workstation that is running MRTG.. If you didn't you can try till you turn blue it won't happen..
Pete ---- Peter P. Benac, CCNA Emacolet Networking Services, Inc Providing Systems and Network Consulting, Training, Web Hosting Services Phone: 919-847-1740 or 866-701-2345 Web: http://www.emacolet.com Need quick reliable Systems or Network Management advice visit http://www.nmsusers.org To have principles... First have courage.. With principles comes integrity!!! > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Alan Rader > Sent: Friday, September 19, 2003 14:09 > To: [EMAIL PROTECTED] > Subject: [mrtg] Re: Cisco PIX 515E > > > > I get the same thing using ver 2. > > --base: Get Device Info on [EMAIL PROTECTED]:::::2 > SNMP Error: > no response received > SNMPv2c_Session (remote host: "ip" [ip].161) > community: "community" > request ID: -500809881 > PDU bufsize: 8000 bytes > timeout: 2s > retries: 5 > backoff: 1) > SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL PROTECTED]:::::2 > > [SNIPPED] -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
