Yes, I think I have done that part correctly. Snmp-server host inside <mrtg server> poll Snmp-server community <mycommunity>
-----Original Message----- From: Peter P. Benac [mailto:[EMAIL PROTECTED] Sent: Friday, September 19, 2003 1:18 PM To: [EMAIL PROTECTED] Subject: [mrtg] Re: Cisco PIX 515E Did you setup the PIX to allow polling from the workstation that is running MRTG.. If you didn't you can try till you turn blue it won't happen.. Pete ---- Peter P. Benac, CCNA Emacolet Networking Services, Inc Providing Systems and Network Consulting, Training, Web Hosting Services Phone: 919-847-1740 or 866-701-2345 Web: http://www.emacolet.com Need quick reliable Systems or Network Management advice visit http://www.nmsusers.org To have principles... First have courage.. With principles comes integrity!!! > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Alan Rader > Sent: Friday, September 19, 2003 14:09 > To: [EMAIL PROTECTED] > Subject: [mrtg] Re: Cisco PIX 515E > > > > I get the same thing using ver 2. > > --base: Get Device Info on [EMAIL PROTECTED]:::::2 > SNMP Error: > no response received > SNMPv2c_Session (remote host: "ip" [ip].161) > community: "community" > request ID: -500809881 > PDU bufsize: 8000 bytes > timeout: 2s > retries: 5 > backoff: 1) > SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL PROTECTED]:::::2 > > [SNIPPED] -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -------------------------------------------- ATTENTION: This message and all attachments are PRIVATE, and may contain information that is CONFIDENTIAL and PRIVILEGED. If you received this message in error, please notify the sender by reply e-mail and delete the message immediately. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
