Thanks to all those that posted things for me to try, it did end up just needing a reboot and whala, snmpv1 responses. BTW, this was on a PIX 525 set up for failover with another 525 running both running 6.2(2) in case any stumbles on this in the future in the archives.
-----Original Message----- From: McBurnett, Jim [mailto:[EMAIL PROTECTED] Sent: Saturday, September 20, 2003 9:42 PM To: Alan Rader Subject: RE: [mrtg] Re: Cisco PIX 515E Alan, I may be able to help.. Send me an output of show runn | in snmp Later, Jim > -----Original Message----- > From: Alan Rader [mailto:[EMAIL PROTECTED] > Sent: Friday, September 19, 2003 6:43 PM > To: [EMAIL PROTECTED] > Subject: [mrtg] Re: Cisco PIX 515E > > > > I may try that this weekend. We have an alternate T1 with a PIX on it > and it is working for me. The differences are: > > Works on my 515 > Can't get snmp info on my 525. > Since the 525 is our main firewall, it is more secure. So it may just > be an issue with finding out what ACLs and such may be preventing snmp > traffic, but I don't see any denying snmp on the side. > > I will try the reboot first though. > > > -----Original Message----- > From: Rich Adamson [mailto:[EMAIL PROTECTED] > Sent: Friday, September 19, 2003 6:28 PM > To: Alan Rader > Subject: Re: [mrtg] Re: Cisco PIX 515E > > > > > The community string is correct and it does not start with a > > non-alphanumeric symbol. The ip is correct and I can ping > it from the > > > server that is running mrtg. The PIX is on the same switched local > > LAN as the server. I have tried using Getif 2.3 with no > luck from the > > > mrtg server. I have the PIX setup to use a syslog server and am > > logging warnings and have not seen any snmp errors. I am > not sure if > > warnings may be too high though. I have not tried a sniffer yet. > > We've seen some versions of PIX software that require a reboot after > implementing snmp and syslogging. I've not attempted to identify which > specific version, but I'd suggest reboot the PIX and test again. > > > -------------------------------------------- ATTENTION: This message and all attachments are PRIVATE, and may contain information that is CONFIDENTIAL and PRIVILEGED. If you received this message in error, please notify the sender by reply e-mail and delete the message immediately. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
