Today's scientists have substituted mathematics for experiments, and they
wander off through equation after equation, and eventually build a structure
which has no relation to reality
Nikola Tesla
SCJP 1.5 ( Sun Certified Java Programmer)
Linux user 300141
Debian GNU/Linux
Date: Tue, 26 Aug 2008 17:58:15 -0700
From: [EMAIL PROTECTED]
To: [email protected]
Subject: Re: [mrtg] MRTG Brocade switch monitoring error
Thanks for the reply,
The IP of the switch that i am using is what i read in my /etc/hosts file.
I
used the same IP to plot the graphs for eth interface, using cfgmaker
and got the errors below. However in the output dir i did get some
graphs, which were not blank, they had some data in it;...isnt this
contradicting to that MRTG cannot resolve the switch IP. Also i can do a
snmpwalk with this IP address and community string public (UCD snmp version
4.2.1)
*******************************************************************************************************
SNMP Error:
no response received
SNMPv1_Session (remote host: "xxx.xxx.xx.xx" [xxx.xxx.xxx.xx].161)
community: "1:public"
request ID: 2100647008
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 629
SNMPWALK Problem for 1.3.6.1.2.1.1 on 1:[EMAIL PROTECTED]:::::v4only
at /usr/local/mrtg-2/bin/cfgmaker line 950
WARNING: Skipping 1:[EMAIL PROTECTED]: as no info could be retrieved
*****************************************************************************************************************************************
On Tue, Aug 26, 2008 at 4:56 PM, anjini shukla <[EMAIL PROTECTED]> wrote:
Hello,
I am trying to plot graphs for my Brocade 4100 SAN switch and am using
Solaris 10, I am following the documentation given:
http://www.xolution.ch/mrtg/ i have written my config file:
~ snip
Target[switch.IP_0]:
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12.1&1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11.1:[EMAIL
PROTECTED]
Title[switch.IP_0]: fc throughput on switch fcswitch port 0 (mysun jnic0
slot7)
PageTop[switch.IP_0]: <H1>fc throughput on switch fcswswitch port 0 (mysun
jnic0 slot7)</H1>
~snip
the error message i am getting is:
2008-08-26 12:03:22: WARNING: Skipping host fcswitch as it does not resolve to
an IPv4 address
2008-08-26 12:03:22: WARNING: no data for
1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12&1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11:[EMAIL
PROTECTED]
Skipping further queries for Host fcswitch in this round.
2008-08-26 12:03:22: ERROR: Target[xxx.xxx.xxx.xx_0][_IN_] '
$target->[0]{$mode} ' did not eval into defined data
2008-08-26 12:03:22: ERROR: Target[xxx.xxx.xxx.xx_0][_OUT_] '
$target->[0]{$mode} ' did not eval into defined data
can any one give me any insight on this, ??
Thanks
_________________________________________________________________
Discover the new Windows Vista
http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE_______________________________________________
mrtg mailing list
[email protected]
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
