First try from the cli. enter snmpwalk and press enter if this is valid it should give you the options requires see sample below. Do the same for snmpget [r...@mrtg ~]# snmpwalk No hostname specified. USAGE: snmpwalk [OPTIONS] AGENT [OID]
Version: 5.4.1 Web: http://www.net-snmp.org/ Email: [email protected] OPTIONS: -h, --help display this help message -H display configuration file directives understood -v 1|2c|3 specifies SNMP version to use -V, --version display package version number SNMP Version 1 or 2c specific -c COMMUNITY set the community string -----Original Message----- From: Nicolás Quesada [mailto:[email protected]] Sent: Tuesday, August 25, 2009 3:08 PM To: Chris Cariffe; Mersberger, Robert Cc: [email protected] Subject: Re: [mrtg] riverstone Tipically, for cisco routers, i make the cisco.mrtg file with cfgmaker, the index.html with indexmaker, and cron the requests... How, and where, can I check the OIDS? How can I try a SNMPWALK or SNMPGET from my linux? so sorry for beeing so ignorant...!! On 8/25/09, Chris Cariffe <[email protected]> wrote: > i'm communicating off the mailling list with you. have you tried to > run an snmpwalk against the router? > > 2009/8/25 Nicolás Quesada <[email protected]> > >> hi! thanks for beeing so fast! >> >> i'm sorry... i don't know to what email i must answer now... >> >> the thing is that snmp is enabled, the community configured and y try >> it with version 1 and 2. >> >> i have an ACL on the device, and i can see that the ACL is working >> everytime i make a request... but i always receive the same message: >> no response received >> >> i know that from another department somebody is working with SNMP >> correctly, but they don't work with MRTG, and only said to me that i >> have to change the OIDs... >> >> Thanks a lot! >> >> (Could you help me with the list mailing email? do you know where >> must i send this message?) >> >> >> >> >> >> On 8/25/09, Chris Cariffe <[email protected]> wrote: >> > looks like you need to enable snmp on the device, have the correct >> > community or a different version of SNMP >> > >> > 2009/8/25 Nicolás Quesada <[email protected]> >> > >> >> Hello everybody, >> >> >> >> i would like to know if it's possible to use MRTG with Riverstone >> >> routers (RS1100), because on my network, everything worked >> >> perfectly with all my Cisco routers, but i didn't received a >> >> single bit from the Riverstone ones.... and I think everything is >> >> correctly configured... >> >> perhaps i'm wrong! >> >> >> >> I cannot create my Riverstone.mrtg because I receive the next error: >> >> >> >> SNMP error: >> >> no response received >> >> ... >> >> at /usr/share/perl5/SNMP_util.pm line 629 >> >> SNMPWalk proble for 1.3.6.1.2.1.1 on commun...@ip v4only >> >> at /usr/bin/cfgmaker line 953 >> >> WARNING: skipping ... >> >> >> >> Thanks a lot!! >> >> >> >> _______________________________________________ >> >> mrtg mailing list >> >> [email protected] >> >> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg >> >> >> > >> > ________________________________ Please consider the environment before printing this e-mail. CONFIDENTIAL NOTICE: This e-mail message and any attachment(s) (collectively, this 'Email') are intended only for the confidential use of the recipient(s) named above. If the reader of this message is not the intended recipient named obove or an agent responsible for delivering it to the intended recipient named above, you have received this Email in error. Please notify the sender immediately and permanently delete this Email and any copies thereof.
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
