if i run this command , always give me the message "no info could be retrieved "
C:\mrtg\bin>perl cfgmaker --global "LoadMibs: c:\mrtg\ZTE-CN-PDSN-PMIRP-MIB" --g lobal "WorkDir: c:\Inetpub\wwwroot\PDSN" --output pdsntest1.cfg public@ 10.2.0.100:::::2 WARNING: Skipping [email protected]:::::2 as no info could be retrieved thanks for your attention . 2010/9/9 xia binhui <[email protected]> > > 10.2.0.100 is one server which is running one applicaiton . > > > i can get the information from 1.3.6.1.4.1.3902.7.222.3.5.1.3 by > MIBbrows application . > > thanks for your attention . > > 2010/9/9 xia binhui <[email protected]> > > >> >> Dear all , >> >> >> >> when i tried to use the following cfgfile, but it failed , can anyone >> help me ? >> >> >> >> < !---------- >> >> RunAsDaemon: yes >> >> Interval: 5 >> >> WorkDir: C:\inetpub\wwwroot\PDSN >> >> >> >> # Options[_]: growright, bits, nopercent >> >> >> >> # Para calculo, cada 64Kbps = 8000 >> >> >> >> EnableIPv6: no >> >> >> >> >> >> >> >> >> >> >> >> #################################### MOVINET >> ################################################## >> >> >> >> ### Usuários Activos ### >> >> >> >> Target[Movinet_Users]: >> 1.3.6.1.4.1.3902.7.222.3.5.1.3&1.3.6.1.4.1.3902.7.222.3.5.1.3:[email protected]: >> ::::2 >> >> YLegend[Movinet_Users]: Usuários >> >> ShortLegend[Movinet_Users]: Usuários >> >> MaxBytes[Movinet_Users]: 15000 >> >> Options[Movinet_Users]: nopercent, gauge, unknaszero, growright >> >> Legend1[Movinet_Users]: Total de Usuários Conectados >> >> LegendI[Movinet_Users]: >> >> LegendO[Movinet_Users]: Movinet Total >> >> Title[Movinet_Users]: Total de Usuários Conectados (TODO PAIS) >> >> PageTop[Movinet_Users]: <H1> Total de Usuários Conectados</H1> >> >> WithPeak[Movinet_Users]: ymw >> >> >> >> !----- > >> >> >> >> >> >> ERROR: >> >> >> >> C:\mrtg\bin>perl mrtg mrtg.cfg >> >> Daemonizing MRTG ... >> >> Do Not close this window. Or MRTG will die >> >> SNMP Error: >> >> Received SNMP response with error code >> >> error status: genErr >> >> index 1 (OID: 1.3.6.1.4.1.3902.7.222.3.5.1.3) >> >> SNMPv2c_Session (remote host: "10.2.0.100" [10.2.0.100].161) >> >> community: "public" >> >> request ID: 433882435 >> >> PDU bufsize: 8000 bytes >> >> timeout: 2s >> >> retries: 5 >> >> backoff: 1) >> >> at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492 >> >> SNMPGET Problem for 1.3.6.1.4.1.3902.7.222.3.5.1.3 >> 1.3.6.1.4.1.3902.7.222.3.5.1.3 >> >> sysUptime sysName on [email protected]:::::2:v4only at mrtg line 2202 >> >> 2010-08-30 11:02:40: ERROR: Target[movinet_users][_IN_] ' >> $target->[0]{$mode} ' >> >> did not eval into defined data >> >> 2010-08-30 11:02:40: ERROR: Target[movinet_users][_OUT_] ' >> $target->[0]{$mode} ' >> >> did not eval into defined data >> >> Terminating on signal SIGINT(2) >> > >
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
