is there any one can help me ? thanks
2010/9/10 xia binhui <[email protected]> > thanks to Steve Shipway . > > On your MRTG server, you say you can use a mibbrowse utility? > ---------- yes , there is response from 10.2.0.100 . > > but i found that the OID is not correct , because after i analyzed the > packet between MRTG server and 10.2.0.100 server , the value about this OID > is NULL . > > after i changed the OID , the value is not NULL from "captured packet " , > it is correct , but MRTG is also not working well . > > > new cfgfile is below : > > ----------------------------------------------------------------------- > RunAsDaemon: yes > Interval: 5 > WorkDir: C:\inetpub\wwwroot\PDSN > Options[_]: growright, bits, nopercent > # Para calculo, cada 64Kbps = 8000 > EnableIPv6: no > > # to get bits instead of bytes and graphs growing to the right > Options[_]: growright, nopercent, gauge, unknaszero > EnableIPv6: no > > LoadMibs: c:\mrtg\ZTE-CN-PDSN-PMIRP-MIB > WorkDir: c:\Inetpub\wwwroot\PDSN > ###################################################################### > # System: > # Description: > # Contact: > # Location: > ###################################################################### > > Target[10.2.0.100]: > 1.3.6.1.4.1.3902.7.222.3.5.1.3.1&1.3.6.1.4.1.3902.7.222.3.5.1.3.1:[email protected]: > ::::2 > LegendI[10.2.0.100]: Total de usuários > LegendO[10.2.0.100]: Usuários activos > Legend1[10.2.0.100]: Total usuários PDSN16K > Legend2[10.2.0.100]: Usuários activos PDSN16K > ShortLegend[10.2.0.100]:users > YLegend[10.2.0.100]:users > MaxBytes[10.2.0.100]: 15000 > Title[10.2.0.100]: ZTE PDSN > > > ------------------------------------------------------------------------------- > > the information is that after i run mrtg cfgfile : > > > C:\mrtg\bin>perl mrtg PDSN.cfg > > Daemonizing MRTG ... > Do Not close this window. Or MRTG will die > SNMP Error: > Received SNMP response with error code > error status: 19 > index 3 (OID: 1.3.6.1.2.1.1.3.0) > > SNMPv2c_Session (remote host: "10.2.0.100" [10.2.0.100].161) > community: "public" > request ID: 2143957165 > > PDU bufsize: 8000 bytes > timeout: 2s > retries: 5 > backoff: 1) > at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492 > SNMPGET Problem for 1.3.6.1.4.1.3902.7.222.3.5.1.3.1 > 1.3.6.1.4.1.3902.7.222.3.5. > 1.3.1 sysUptime sysName on [email protected]:::::2:v4only > at mrtg line 2202 > 2010-09-10 08:42:00: ERROR: Target[10.2.0.100][_IN_] ' $target->[0]{$mode} > ' did > > not eval into defined data > 2010-09-10 08:42:00: ERROR: Target[10.2.0.100][_OUT_] ' $target->[0]{$mode} > ' di > > d not eval into defined data > 2010-09-10 08:42:00, Rateup WARNING: C:/mrtg/bin\rateup Can't remove > 10.2.0.100. > old updating log file > > SNMP Error: > Received SNMP response with error code > error status: 19 > index 3 (OID: 1.3.6.1.2.1.1.3.0) > > SNMPv2c_Session (remote host: "10.2.0.100" [10.2.0.100].161) > community: "public" > request ID: 2143957166 > > PDU bufsize: 8000 bytes > timeout: 2s > retries: 5 > backoff: 1) > at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492 > SNMPGET Problem for 1.3.6.1.4.1.3902.7.222.3.5.1.3.1 > 1.3.6.1.4.1.3902.7.222.3.5. > 1.3.1 sysUptime sysName on [email protected]:::::2:v4only > at mrtg line 2202 > 2010-09-10 08:47:00: ERROR: Target[10.2.0.100][_IN_] ' $target->[0]{$mode} > ' did > > not eval into defined data > 2010-09-10 08:47:00: ERROR: Target[10.2.0.100][_OUT_] ' $target->[0]{$mode} > ' di > > d not eval into defined data > > thanks for your attention . > > > > > > > > 2010/9/9 Steve Shipway <[email protected]> > > MRTG (and cfgmaker) are unable to use SNMP to query this OID. >> >> >> >> Either your community string is wrong, or you have a firewall or ACL >> blocking you from talking to this server, or the OID is wrong. >> >> >> >> On your MRTG server, you say you can use a mibbrowse utility? Try to use >> something simple like snmpwalk to verify you can talk to the server. If you >> can, then check that this is EXACTLY the correct OID – sometimes there is a >> trailing .0 suffix that is not displayed. >> >> >> >> You are using SNMPv2 – check this is supported, maybe the device only has >> this OID in SNMPv1? Maybe you are testing with SNMPv1 but MRTG is using >> SNMPv2c? >> >> >> >> Steve >> >> >> ------------------------------ >> >> *Steve Shipway* >> >> ITS Unix Services Design Lead >> >> University of Auckland >> >> Floor 2, 58 Symonds Street >> >> *09 3737599 ext 86487* >> >> P Please consider the environment before printing this e-mail >> >> * * >> >> >> >> *From:* [email protected] [mailto: >> mrtg-bounces+s.shipway <mrtg-bounces%2Bs.shipway>=auckland.ac.nz@ >> lists.oetiker.ch] *On Behalf Of *xia binhui >> *Sent:* Thursday, 9 September 2010 9:13 p.m. >> *To:* [email protected] >> *Subject:* [mrtg] customize OID problem >> >> >> >> >> >> Dear all , >> >> >> >> when i tried to use the following cfgfile, but it failed , can anyone >> help me ? >> >> >> >> < !---------- >> >> RunAsDaemon: yes >> >> Interval: 5 >> >> WorkDir: C:\inetpub\wwwroot\PDSN >> >> >> >> # Options[_]: growright, bits, nopercent >> >> >> >> # Para calculo, cada 64Kbps = 8000 >> >> >> >> EnableIPv6: no >> >> >> >> >> >> >> >> >> >> >> >> #################################### MOVINET >> ################################################## >> >> >> >> ### Usuários Activos ### >> >> >> >> Target[Movinet_Users]: >> 1.3.6.1.4.1.3902.7.222.3.5.1.3&1.3.6.1.4.1.3902.7.222.3.5.1.3:[email protected]: >> ::::2 >> >> YLegend[Movinet_Users]: Usuários >> >> ShortLegend[Movinet_Users]: Usuários >> >> MaxBytes[Movinet_Users]: 15000 >> >> Options[Movinet_Users]: nopercent, gauge, unknaszero, growright >> >> Legend1[Movinet_Users]: Total de Usuários Conectados >> >> LegendI[Movinet_Users]: >> >> LegendO[Movinet_Users]: Movinet Total >> >> Title[Movinet_Users]: Total de Usuários Conectados (TODO PAIS) >> >> PageTop[Movinet_Users]: <H1> Total de Usuários Conectados</H1> >> >> WithPeak[Movinet_Users]: ymw >> >> >> >> !----- > >> >> >> >> >> >> ERROR: >> >> >> >> C:\mrtg\bin>perl mrtg mrtg.cfg >> >> Daemonizing MRTG ... >> >> Do Not close this window. Or MRTG will die >> >> SNMP Error: >> >> Received SNMP response with error code >> >> error status: genErr >> >> index 1 (OID: 1.3.6.1.4.1.3902.7.222.3.5.1.3) >> >> SNMPv2c_Session (remote host: "10.2.0.100" [10.2.0.100].161) >> >> community: "public" >> >> request ID: 433882435 >> >> PDU bufsize: 8000 bytes >> >> timeout: 2s >> >> retries: 5 >> >> backoff: 1) >> >> at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492 >> >> SNMPGET Problem for 1.3.6.1.4.1.3902.7.222.3.5.1.3 >> 1.3.6.1.4.1.3902.7.222.3.5.1.3 >> >> sysUptime sysName on [email protected]:::::2:v4only at mrtg line 2202 >> >> 2010-08-30 11:02:40: ERROR: Target[movinet_users][_IN_] ' >> $target->[0]{$mode} ' >> >> did not eval into defined data >> >> 2010-08-30 11:02:40: ERROR: Target[movinet_users][_OUT_] ' >> $target->[0]{$mode} ' >> >> did not eval into defined data >> >> Terminating on signal SIGINT(2) >> > >
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
