I think you need to re-state your issue. 'not working well' is not something we can make intelligent suggestions to fix.
Lyle Giese LCR Computer Services, Inc. xia binhui wrote: > is there any one can help me ? > > thanks > > > > > 2010/9/10 xia binhui <[email protected] <mailto:[email protected]>> > > thanks to Steve Shipway . > > On your MRTG server, you say you can use a mibbrowse utility? > ---------- yes , there is response from 10.2.0.100 . > > but i found that the OID is not correct , because after i analyzed > the packet between MRTG server and 10.2.0.100 server , the value > about this OID is NULL . > > after i changed the OID , the value is not NULL from "captured > packet " , it is correct , but MRTG is also not working well . > > > new cfgfile is below : > > ----------------------------------------------------------------------- > RunAsDaemon: yes > Interval: 5 > WorkDir: C:\inetpub\wwwroot\PDSN > Options[_]: growright, bits, nopercent > # Para calculo, cada 64Kbps = 8000 > EnableIPv6: no > > # to get bits instead of bytes and graphs growing to the right > Options[_]: growright, nopercent, gauge, unknaszero > EnableIPv6: no > > LoadMibs: c:\mrtg\ZTE-CN-PDSN-PMIRP-MIB > WorkDir: c:\Inetpub\wwwroot\PDSN > ###################################################################### > # System: > # Description: > # Contact: > # Location: > ###################################################################### > > Target[10.2.0.100]: > > 1.3.6.1.4.1.3902.7.222.3.5.1.3.1&1.3.6.1.4.1.3902.7.222.3.5.1.3.1:[email protected]:::::2 > LegendI[10.2.0.100]: Total de usuários > LegendO[10.2.0.100]: Usuários activos > Legend1[10.2.0.100]: Total usuários PDSN16K > Legend2[10.2.0.100]: Usuários activos PDSN16K > ShortLegend[10.2.0.100]:users > YLegend[10.2.0.100]:users > MaxBytes[10.2.0.100]: 15000 > Title[10.2.0.100]: ZTE PDSN > > > ------------------------------------------------------------------------------- > > the information is that after i run mrtg cfgfile : > > > C:\mrtg\bin>perl mrtg PDSN.cfg > > Daemonizing MRTG ... > Do Not close this window. Or MRTG will die > SNMP Error: > Received SNMP response with error code > error status: 19 > index 3 (OID: 1.3.6.1.2.1.1.3.0) > > SNMPv2c_Session (remote host: "10.2.0.100" [10.2.0.100].161) > community: "public" > request ID: 2143957165 > > PDU bufsize: 8000 bytes > timeout: 2s > retries: 5 > backoff: 1) > at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492 > SNMPGET Problem for 1.3.6.1.4.1.3902.7.222.3.5.1.3.1 > 1.3.6.1.4.1.3902.7.222.3.5. > 1.3.1 sysUptime sysName on [email protected]:::::2:v4only > <mailto:[email protected]:::::2:v4only> > at mrtg line 2202 > 2010-09-10 08:42:00: ERROR: Target[10.2.0.100][_IN_] ' > $target->[0]{$mode} ' did > > not eval into defined data > 2010-09-10 08:42:00: ERROR: Target[10.2.0.100][_OUT_] ' > $target->[0]{$mode} ' di > > d not eval into defined data > 2010-09-10 08:42:00, Rateup WARNING: C:/mrtg/bin\rateup Can't > remove 10.2.0.100. > old updating log file > > SNMP Error: > Received SNMP response with error code > error status: 19 > index 3 (OID: 1.3.6.1.2.1.1.3.0) > > SNMPv2c_Session (remote host: "10.2.0.100" [10.2.0.100].161) > community: "public" > request ID: 2143957166 > > PDU bufsize: 8000 bytes > timeout: 2s > retries: 5 > backoff: 1) > at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492 > SNMPGET Problem for 1.3.6.1.4.1.3902.7.222.3.5.1.3.1 > 1.3.6.1.4.1.3902.7.222.3.5. > 1.3.1 sysUptime sysName on [email protected]:::::2:v4only > <mailto:[email protected]:::::2:v4only> > at mrtg line 2202 > 2010-09-10 08:47:00: ERROR: Target[10.2.0.100][_IN_] ' > $target->[0]{$mode} ' did > > not eval into defined data > 2010-09-10 08:47:00: ERROR: Target[10.2.0.100][_OUT_] ' > $target->[0]{$mode} ' di > > d not eval into defined data > > thanks for your attention . > > > > > > > > 2010/9/9 Steve Shipway <[email protected] > <mailto:[email protected]>> > > MRTG (and cfgmaker) are unable to use SNMP to query this OID. > > > > Either your community string is wrong, or you have a firewall > or ACL blocking you from talking to this server, or the OID is > wrong. > > > > On your MRTG server, you say you can use a mibbrowse utility? > Try to use something simple like snmpwalk to verify you can > talk to the server. If you can, then check that this is > EXACTLY the correct OID -- sometimes there is a trailing .0 > suffix that is not displayed. > > > > You are using SNMPv2 -- check this is supported, maybe the > device only has this OID in SNMPv1? Maybe you are testing > with SNMPv1 but MRTG is using SNMPv2c? > > > > Steve > > > > > ------------------------------------------------------------------------ > > *Steve Shipway* > > ITS Unix Services Design Lead > > University of Auckland > > Floor 2, 58 Symonds Street > > /09 3737599 ext 86487/ > > P Please consider the environment before printing this e-mail > > / / > > > > *From:* mrtg-bounces+s.shipway=auckland.ac.nz > <http://auckland.ac.nz/>@lists.oetiker.ch > <http://lists.oetiker.ch/> [mailto:mrtg-bounces+s.shipway > <mailto:mrtg-bounces%2Bs.shipway>=auckland.ac.nz > <http://auckland.ac.nz/>@lists.oetiker.ch > <http://lists.oetiker.ch/>] *On Behalf Of *xia binhui > *Sent:* Thursday, 9 September 2010 9:13 p.m. > *To:* [email protected] <mailto:[email protected]> > *Subject:* [mrtg] customize OID problem > > > > > > Dear all , > > > > when i tried to use the following cfgfile, but it failed , > can anyone help me ? > > > > < !---------- > > RunAsDaemon: yes > > Interval: 5 > > WorkDir: C:\inetpub\wwwroot\PDSN > > > > # Options[_]: growright, bits, nopercent > > > > # Para calculo, cada 64Kbps = 8000 > > > > EnableIPv6: no > > > > > > > > > > > > #################################### MOVINET > ################################################## > > > > ### Usuários Activos ### > > > > Target[Movinet_Users]: > > 1.3.6.1.4.1.3902.7.222.3.5.1.3&1.3.6.1.4.1.3902.7.222.3.5.1.3:[email protected]:::::2 > > YLegend[Movinet_Users]: Usuários > > ShortLegend[Movinet_Users]: Usuários > > MaxBytes[Movinet_Users]: 15000 > > Options[Movinet_Users]: nopercent, gauge, unknaszero, growright > > Legend1[Movinet_Users]: Total de Usuários Conectados > > LegendI[Movinet_Users]: > > LegendO[Movinet_Users]: Movinet Total > > Title[Movinet_Users]: Total de Usuários Conectados (TODO PAIS) > > PageTop[Movinet_Users]: <H1> Total de Usuários Conectados</H1> > > WithPeak[Movinet_Users]: ymw > > > > !----- > > > > > > > ERROR: > > > > C:\mrtg\bin>perl mrtg mrtg.cfg > > Daemonizing MRTG ... > > Do Not close this window. Or MRTG will die > > SNMP Error: > > Received SNMP response with error code > > error status: genErr > > index 1 (OID: 1.3.6.1.4.1.3902.7.222.3.5.1.3) > > SNMPv2c_Session (remote host: "10.2.0.100" [10.2.0.100].161) > > community: "public" > > request ID: 433882435 > > PDU bufsize: 8000 bytes > > timeout: 2s > > retries: 5 > > backoff: 1) > > at C:/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 492 > > SNMPGET Problem for 1.3.6.1.4.1.3902.7.222.3.5.1.3 > 1.3.6.1.4.1.3902.7.222.3.5.1.3 > > sysUptime sysName on [email protected]:::::2:v4only > <mailto:[email protected]:::::2:v4only> at mrtg line 2202 > > 2010-08-30 11:02:40: ERROR: Target[movinet_users][_IN_] ' > $target->[0]{$mode} ' > > did not eval into defined data > > 2010-08-30 11:02:40: ERROR: Target[movinet_users][_OUT_] ' > $target->[0]{$mode} ' > > did not eval into defined data > > Terminating on signal SIGINT(2) > > > > ------------------------------------------------------------------------ > > _______________________________________________ > mrtg mailing list > [email protected] > https://lists.oetiker.ch/cgi-bin/listinfo/mrtg >
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
