In my config (/tmp/test.cfg) is IPV6 enabled: EnableIPv6: yes
Florian Am 03.09.2011 17:18, schrieb Lyle Giese: > On 09/03/11 08:00, Florian wrote: >> Hi, >> >> i'm running CentOS 6.0 on my server and installed mrtg from the >> rpm-package mrtg-2.16.2 . >> I also installed the packages perl-IO-Socket-INET6 perl-Socket6. >> >> mrtg works fine with IPV4-Addresses. When i specify a Target by >> IPV6-Address mrtg fails. >> >> Here i have a small sample-config for V4 which is working: >> >> LogDir: /tmp >> ThreshDir: /tmp >> HtmlDir: /tmp >> ImageDir: /tmp >> LogDir: /tmp >> EnableIPv6: yes >> Target[bai-gw-i-oct]: ifInOctets.1&ifOutOctets.1:[email protected] >> Title[bai-gw-i-oct]: Test >> MaxBytes[bai-gw-i-oct]: 100000000 >> ---------------------------------------------------- >> >> Here the same for V6 which fails. >> When running mrtg there is no snmp-packet sent to the network. >> >> LogDir: /tmp >> ThreshDir: /tmp >> HtmlDir: /tmp >> ImageDir: /tmp >> LogDir: /tmp >> EnableIPv6: yes >> Target[bai-gw-i-oct]: >> ifInOctets.1&ifOutOctets.1:abc123@[2001:b50:940f::f001] >> Title[bai-gw-i-oct]: Test >> MaxBytes[bai-gw-i-oct]: 100000000 >> >> # env LANG=C /usr/bin/mrtg /tmp/test.cfg >> SNMP Error: >> send_query: Address family not supported by protocol >> SNMPv1_Session (remote host: "2001:b50:940f::f001" >> [2001:b50:940f::f001].161) >> community: "abc123" >> request ID: 1156567655 >> PDU bufsize: 8000 bytes >> timeout: 2s >> retries: 5 >> backoff: 1) >> at /usr/bin/../lib64/mrtg2/SNMP_util.pm line 492 >> SNMPGET Problem for ifInOctets.1 ifOutOctets.1 sysUptime sysName on >> sni123@[2001:b50:940f::f001] >> at /usr/bin/mrtg line 2202 >> 2011-09-03 14:13:01: ERROR: Target[bai-gw-i-oct][_IN_] ' >> $target->[0]{$mode} ' did not eval into defined data >> 2011-09-03 14:13:01: ERROR: Target[bai-gw-i-oct][_OUT_] ' >> $target->[0]{$mode} ' did not eval into defined data >> >> >> >> >> With snmpwalk (net-snmp-utils) i can reach the device by IPV4 and IPV6. >> >> Where is my mistake? Has anyone a hint? >> >> Thanks in advance, >> Florian > > Have you enabled IPv6 in your mrtg.cfg? > > EnableIPv6 > > Lyle Giese > LCR Computer Services, Inc. _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
