Thanks for the hint. This file contains the mrtg-v6-doku. (like http://oss.oetiker.ch/mrtg/doc/mrtg-ipv6.en.html ) Unfortunately the file doesn't help.
Florian -------------------------------- Am 03.09.2011 18:30, schrieb Lyle Giese: > On 09/03/11 10:38, Florian wrote: >> In my config (/tmp/test.cfg) is IPV6 enabled: >> >> EnableIPv6: yes >> >> Florian >> >> Am 03.09.2011 17:18, schrieb Lyle Giese: >>> On 09/03/11 08:00, Florian wrote: >>>> Hi, >>>> >>>> i'm running CentOS 6.0 on my server and installed mrtg from the >>>> rpm-package mrtg-2.16.2 . >>>> I also installed the packages perl-IO-Socket-INET6 perl-Socket6. >>>> >>>> mrtg works fine with IPV4-Addresses. When i specify a Target by >>>> IPV6-Address mrtg fails. >>>> >>>> Here i have a small sample-config for V4 which is working: >>>> >>>> LogDir: /tmp >>>> ThreshDir: /tmp >>>> HtmlDir: /tmp >>>> ImageDir: /tmp >>>> LogDir: /tmp >>>> EnableIPv6: yes >>>> Target[bai-gw-i-oct]: ifInOctets.1&ifOutOctets.1:[email protected] >>>> Title[bai-gw-i-oct]: Test >>>> MaxBytes[bai-gw-i-oct]: 100000000 >>>> ---------------------------------------------------- >>>> >>>> Here the same for V6 which fails. >>>> When running mrtg there is no snmp-packet sent to the network. >>>> >>>> LogDir: /tmp >>>> ThreshDir: /tmp >>>> HtmlDir: /tmp >>>> ImageDir: /tmp >>>> LogDir: /tmp >>>> EnableIPv6: yes >>>> Target[bai-gw-i-oct]: >>>> ifInOctets.1&ifOutOctets.1:abc123@[2001:b50:940f::f001] >>>> Title[bai-gw-i-oct]: Test >>>> MaxBytes[bai-gw-i-oct]: 100000000 >>>> >>>> # env LANG=C /usr/bin/mrtg /tmp/test.cfg >>>> SNMP Error: >>>> send_query: Address family not supported by protocol >>>> SNMPv1_Session (remote host: "2001:b50:940f::f001" >>>> [2001:b50:940f::f001].161) >>>> community: "abc123" >>>> request ID: 1156567655 >>>> PDU bufsize: 8000 bytes >>>> timeout: 2s >>>> retries: 5 >>>> backoff: 1) >>>> at /usr/bin/../lib64/mrtg2/SNMP_util.pm line 492 >>>> SNMPGET Problem for ifInOctets.1 ifOutOctets.1 sysUptime sysName on >>>> sni123@[2001:b50:940f::f001] >>>> at /usr/bin/mrtg line 2202 >>>> 2011-09-03 14:13:01: ERROR: Target[bai-gw-i-oct][_IN_] ' >>>> $target->[0]{$mode} ' did not eval into defined data >>>> 2011-09-03 14:13:01: ERROR: Target[bai-gw-i-oct][_OUT_] ' >>>> $target->[0]{$mode} ' did not eval into defined data >>>> >>>> >>>> >>>> >>>> With snmpwalk (net-snmp-utils) i can reach the device by IPV4 and >>>> IPV6. >>>> >>>> Where is my mistake? Has anyone a hint? >>>> >>>> Thanks in advance, >>>> Florian >>> >>> Have you enabled IPv6 in your mrtg.cfg? >>> >>> EnableIPv6 >>> >>> Lyle Giese >>> LCR Computer Services, Inc. > > I install from source and in the doc directory there is a > mrtg-ipv6.pod file I am looking at. You may want to review the > requirements noted in that file. There are some version requirements > noted at the end of that document for IPv6. > > I am not familar with CentOS. I have been using SuSE and OpenSuSE for > a while here. > > Lyle Giese > LCR Computer Services, Inc. _______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
