> On 31 Aug 2018, at 11:00, Martin Schreiber <[email protected]> wrote: > > On Friday 31 August 2018 11:37:40 Geoffrey Barton via mseide-msegui-talk > wrote: >> >> Unfortunately does not seem any different! >> > I could reproduce with a ST discovery board that 'Target'-'Download' every > second time failed with a 'Remote connection closed' error. By > activating 'Restart gdb before load' 'Target'-'Download' works every time for > me.
try ‘project’ ‘build’ before download each time. This shows the one in three success rate here. Just repeating ’target’ ‘download’ has a one in two success rate (with ‘restart gdb before load’ selected). > I assume there is an another problem with the running DMA on your board. yes, its odd that, now you have replicated the problem. Here, if I disable the i2s/dma connection, ‘project’ ‘build’ followed by ’target’ ‘continue’ works every time! Is your disco board an M3 or M4? I am using the M4 (and the processor pulldown is set at armm3). I have not traced the function of the pulldown; I assume it is just to do with register names. Geoffrey ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ mseide-msegui-talk mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mseide-msegui-talk
