On Friday 31 August 2018 12:22:29 Geoffrey Barton via mseide-msegui-talk wrote: > > On 31 Aug 2018, at 11:00, Martin Schreiber <[email protected]> wrote: > > > > On Friday 31 August 2018 11:37:40 Geoffrey Barton via mseide-msegui-talk > > > > wrote: > >> Unfortunately does not seem any different! > > > > I could reproduce with a ST discovery board that 'Target'-'Download' > > every second time failed with a 'Remote connection closed' error. By > > activating 'Restart gdb before load' 'Target'-'Download' works every time > > for me. > > try ‘project’ ‘build’ before download each time. This shows the one in > three success rate here. > That works every time for me independent of the setting of 'Restart gdb before load'.
> Just repeating ’target’ ‘download’ has a one in two success rate (with > ‘restart gdb before load’ selected). > Which error message in MSEide status display? > > I assume there is an another problem with the running DMA on your board. > > yes, its odd that, now you have replicated the problem. Here, if I disable > the i2s/dma connection, ‘project’ ‘build’ followed by ’target’ ‘continue’ > works every time! Is your disco board an M3 or M4? M3. > I am using the M4 (and > the processor pulldown is set at armm3). I have not traced the function of > the pulldown; I assume it is just to do with register names. > Correct, it switches the displayed CPU form. Martin ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ mseide-msegui-talk mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mseide-msegui-talk
