Hi all I've just started with the MSP430 and tried the Code Composer Studio v4 from the CD in the box on Windows and it updated the FET430 FW to 2.04.07.0001. Was this a mistake?
I prefer OS X so I've compiled mspdebug v14 from git and also found and installed the TI USB Serial drivers. I'm running "./mspdebug -d /dev/tty.TIVCP3410-UIFfa140 uif" and get this error with a connected MSP-EXP430F5438 board: MSPDebug version 0.14 - debugging tool for MSP430 MCUs Copyright (C) 2009-2011 Daniel Beer <dlb...@gmail.com> This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. Trying to open UIF on /dev/tty.TIVCP3410-UIFfd130... Initializing FET... FET protocol version is 20407001 Configured for Spy-Bi-Wire Set Vcc: 3000 mV fet: FET returned error code 4 (Could not find device (or device not supported)) fet: command C_IDENT1 failed fet: identify failed Trying again... Initializing FET... FET protocol version is 20407001 Configured for Spy-Bi-Wire Sending reset... uif: read error: Operation timed out warning: fet: reset failed fet: FET returned error code 4 (Could not find device (or device not supported)) warning: fet: set VCC failed fet: reply type mismatch fet: command C_IDENT1 failed fet: identify failed If the firmware is too new, is there a way to downgrade and which one do I need? Thanks Matthias Ringwald ------------------------------------------------------------------------------ What You Don't Know About Data Connectivity CAN Hurt You This paper provides an overview of data connectivity, details its effect on application quality, and explores various alternative solutions. http://p.sf.net/sfu/progress-d2d _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
