Hello Daniel thanks a lot for the "simple" suggestion. I get the mspdebug prompt now!
On 07.03.2011, at 00:36, Daniel Beer wrote: > Hi Matthias, > > It looks like this chip uses JTAG rather than Spy-Bi-Wire. Try using the -j > option with MSPDebug: > > ./mspdebug -j -d /dev/tty.TIVCP3410-UIFfa140 uif > > With the firmware version you're using, chip support depends on the > programming software rather than the FET firmware. The F5438 and F5438A are > both supported by MSPDebug, so this should work (hopefully). Could you clarify this (there are two "firmware" in your sentence :) ? The documentation of the MSP-EXP430F5438 board only mentions JTAG. The F5438A itself supports JTAG & Spy-by-wire. Anyway, it looks working. I intend to create Mac fink packages for the mspgcc(4) and mspdebug when I get a bit used to them. Best Matthias ------------------------------------------------------------------------------ What You Don't Know About Data Connectivity CAN Hurt You This paper provides an overview of data connectivity, details its effect on application quality, and explores various alternative solutions. http://p.sf.net/sfu/progress-d2d _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
