Quoting Matthias Ringwald <matth...@ringwald.ch>: >> With the firmware version you're using, chip support depends on the >> programming software rather than the FET firmware. The F5438 and >> F5438A are both supported by MSPDebug, so this should work >> (hopefully). > > Could you clarify this (there are two "firmware" in your sentence :) ?
Both instances of "firmware" refer to the firmware inside the FET programming tool (independent of MSPDebug or the MSP430 chip). In older FET firmware versions, the FET itself was responsible for knowing different settings for different MSP430 chips. In new FET firmware versions, the programming software on the PC is expected to deal with this. Cheers, Daniel -- D.L. Beer Engineering www.dlbeer.co.nz ------------------------------------------------------------------------------ What You Don't Know About Data Connectivity CAN Hurt You This paper provides an overview of data connectivity, details its effect on application quality, and explores various alternative solutions. http://p.sf.net/sfu/progress-d2d _______________________________________________ Mspgcc-users mailing list Mspgcc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mspgcc-users
