Nope. "The subsystem needed to support the image type is not present". It seems like it's a32 bit app that cannot run under 64 bit Pe
/Mats Från: [email protected] [mailto:[email protected]] För Olsson Mats Skickat: den 12 juni 2014 08:23 Till: [email protected] Ämne: SV: [mssms] Issue with Intel nic drivers on W7 X64 deployment with 32 bit WinPE Thanks Man. I will try that at once. I have been told that there was only 32 bit versions of that tool Best regards Mats Från: [email protected]<mailto:[email protected]> [mailto:[email protected]] För Johns, Damon (DoJ) Skickat: den 12 juni 2014 00:37 Till: '[email protected]' Ämne: RE: [mssms] Issue with Intel nic drivers on W7 X64 deployment with 32 bit WinPE Are you talking about running the HP BiosConfigUtility.exe? I run this under a x64 Win PE 5.0 boot image deploying x64 Windows 7 SP1 to set BIOS settings, a password and enable the TPM and I don't have any issues. I'm running version 2.14 Rev A (SP49507) of the HP Bios Config Utility. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Olsson Mats Sent: Wednesday, 11 June 2014 11:58 PM To: [email protected]<mailto:[email protected]> Subject: SV: [mssms] Issue with Intel nic drivers on W7 X64 deployment with 32 bit WinPE The main problem here is that HP only has 32 bit bios tools and I do have to run them before I install the OS :) I will try talk to HP about making true 64 bit tools abailable /Mats Från: [email protected]<mailto:[email protected]> [mailto:[email protected]] För Jason Sandys Skickat: den 11 juni 2014 15:30 Till: [email protected]<mailto:[email protected]> Ämne: RE: [mssms] Issue with Intel nic drivers on W7 X64 deployment with 32 bit WinPE This seems to be coming up a lot lately. To my knowledge, there isn't an official support statement other than it has always worked and still should. I've heard of multiple cases however where using a 32-bit boot image caused issues that went away entirely when using a 64-bit boot image. No, that doesn't help, but as the world transitions to UEFI, you're going to have to do this anyway, so it's probably a good time for everyone to just start using the corresponding boot image. Yes, this will add a couple of small challenges, but they can be overcome by separating the two unknown computers into their own collections (among other ways). J From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Olsson Mats Sent: Wednesday, June 11, 2014 8:14 AM To: [email protected]<mailto:[email protected]> Subject: SV: [mssms] Issue with Intel nic drivers on W7 X64 deployment with 32 bit WinPE No WinPe works as it should. It under the Setup Windows and Configuration manager step the problem comes. The step will complete in winpe, reboot the system to start the windows setup and it's during this setup win7 will bluscreen complaining that a critical device/driver failed. I have then traced it to the network drivers /Mats Från: [email protected]<mailto:[email protected]> [mailto:[email protected]] För Matt Wilkinson Skickat: den 11 juni 2014 15:06 Till: [email protected]<mailto:[email protected]> Ämne: RE: [mssms] Issue with Intel nic drivers on W7 X64 deployment with 32 bit WinPE At what stage do you get the Bluescreen? Is it when you are entering the winpe phase? From: Olsson Mats [mailto:[email protected]] Sent: 11 June 2014 12:48 To: [email protected]<mailto:[email protected]> Subject: SV: [mssms] Issue with Intel nic drivers on W7 X64 deployment with 32 bit WinPE They are using Bios Från: [email protected]<mailto:[email protected]> [mailto:[email protected]] För Matt Wilkinson Skickat: den 11 juni 2014 13:46 Till: [email protected]<mailto:[email protected]> Ämne: RE: [mssms] Issue with Intel nic drivers on W7 X64 deployment with 32 bit WinPE Are you using UEFI or BIOS? From: Olsson Mats [mailto:[email protected]] Sent: 11 June 2014 10:09 To: [email protected]<mailto:[email protected]> Subject: [mssms] Issue with Intel nic drivers on W7 X64 deployment with 32 bit WinPE I have run into a very interesting issue with W7 X64 deployments. If we use 32Bit WinPE for this Task Sequence we will get a blue screen during installation if the machine has an Intel Nic The same TS will work for Virtual machines (VMware) If we use 64Bit WinPE for the same Task Sequence it will install correctly. This leads to the conclusion that there is some issue with the Intel drivers and the install driver package step in my TS. But since it works if I just use 64 bit boot media for the same TS it also seems to be related to the boot media. As I understand it is a supported scenario to deploy an X64 OS from a 32 bit PE. I have no ideas currently how to fix this so help please :) We do need the 32 bit PE so that we can fix Bios settings on our HP laptops in TS before they get an OS installed (TPM config for example) Best Regards Mats _____________________________________________________________________ This email has been scanned by the MessageLabs Email Security System on behalf of Leeds College of Building. For more information please visit http://www.symanteccloud.com _____________________________________________________________________ _____________________________________________________________________ This email has been scanned by the MessageLabs Email Security System on behalf of Leeds College of Building. For more information please visit http://www.symanteccloud.com _____________________________________________________________________ _____________________________________________________________________ This email has been scanned by the MessageLabs Email Security System on behalf of Leeds College of Building. For more information please visit http://www.symanteccloud.com _____________________________________________________________________ _____________________________________________________________________ This email has been scanned by the MessageLabs Email Security System on behalf of Leeds College of Building. For more information please visit http://www.symanteccloud.com _____________________________________________________________________ ________________________________ CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission.
