I haven’t had another SP3 to test with since the latest Oct release. I was using September’s. But yes, I was doing all the updates, software and firmware, that were available at that time.
From: [email protected] [mailto:[email protected]] On Behalf Of Niall Brady Sent: Thursday, October 23, 2014 9:12 AM To: [email protected] Subject: Re: [mssms] imaging Surface Pro 3 via docking station interesting, no change in behaviour after the sp3 was installed/firmware updated ? On Thu, Oct 23, 2014 at 4:09 PM, Bradley, Matt <[email protected]<mailto:[email protected]>> wrote: 1663 From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Niall Brady Sent: Thursday, October 23, 2014 9:04 AM To: [email protected]<mailto:[email protected]> Subject: Re: [mssms] imaging Surface Pro 3 via docking station ok and is your usb network 100mbit (model 1552) or the gigabit one (model 1663) On Thu, Oct 23, 2014 at 3:59 PM, Bradley, Matt <[email protected]<mailto:[email protected]>> wrote: Never got an error, it would just time out looking for the PXE server, and then boot on into the OS that was already preloaded. I went through MS support on that one, and after checking PXE settings (we’re using IP helper, which I’m told is necessary to image UEFI devices), and confirming those were good, it was recommended to get a MS USB Ethernet adapter. Go that, plugged it in, and it immediately saw that PXE connection and acted normal from there out. From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Niall Brady Sent: Thursday, October 23, 2014 8:33 AM To: [email protected]<mailto:[email protected]> Subject: Re: [mssms] imaging Surface Pro 3 via docking station thanks Matt, what error did you get when you tried through the docking station ? On Thu, Oct 23, 2014 at 3:24 PM, Bradley, Matt <[email protected]<mailto:[email protected]>> wrote: I never could get our Surface Pro 3’s to PXE boot through the docking station. I had to get the official USB Ethernet adapter from Microsoft, and then it immediately saw the PXE server. From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Niall Brady Sent: Wednesday, October 22, 2014 2:55 AM To: [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]> Subject: [mssms] imaging Surface Pro 3 via docking station hi, as I don't have access to a SP3 docking station i'd like to know if any of you lot have tried imaging the Surface Pro 3 while plugged into the docking station using the built-in gigabit nic on the back of the dock, if so, did you image via Configuration Manager or MDT and how was the experience (any issues or gotchas from using the DOCK versus traditional usb dongle nic for imaging)? let me know please and thanks in advance cheers niall
