SEMI-success…. This launches the setup fine from remote Powershell but it
stalls with the following error – same command line runs without a hitch if
launched locally on the target server from the command prompt. So why does it
gripe about BITS when launched via remote Powershell but not locally?
Invoke-Command -ComputerName DEV-POS-01 -scriptblock {cmd /c
C:\Windows\Temp\ccmsetup.exe /noservice /BITSpriority:low /mp:10.9.24.240
SMSSITECODE=DEV FSP=dev-sccm.mydomain.com}
BITS job creation failed with 80200014. Unable to check BITS version
ccmsetup 12/4/2014 5:06:22 PM 4076 (0x0FEC)
This operating system does not contain the correct version of BITS. BITS 2.5 or
later is required. ccmsetup 12/4/2014 5:06:22 PM 4076 (0x0FEC)
Sending Fallback Status Point message to 'dev-sccm-01.dev.mindbodyonline.com',
STATEID='321'. ccmsetup 12/4/2014 5:06:22 PM 4076
(0x0FEC)
Failed to get client version for sending messages to FSP. Error 0x8004100e
ccmsetup 12/4/2014 5:06:22 PM 4076 (0x0FEC)
Casey Robertson
Systems Engineer
W 619.878.9099
E [email protected]
MINDBODY, Inc.
4051 Broad Street, Suite 220
San Luis Obispo, CA 93401
[Logo-for-email-signature.jpg] <http://www.mindbodyonline.com/>
From: [email protected] [mailto:[email protected]] On
Behalf Of Casey Robertson
Sent: December 4, 2014 2:42 PM
To: [email protected]
Subject: RE: [mssms] Why is this Invoke-Command failing for installing t he
SCCM client?
Guys I’ve copied and run ccmsetup /mp:xxxxxx SMSSITECODE=xxxxx etc for years.
It then goes to the MP and pulls the files. What am I missing?
Casey Robertson
Systems Engineer
W 619.878.9099
E [email protected]<mailto:[email protected]>
MINDBODY, Inc.
4051 Broad Street, Suite 220
San Luis Obispo, CA 93401
[Logo-for-email-signature.jpg] <http://www.mindbodyonline.com/>
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Daniel Ratliff
Sent: December 4, 2014 8:28 AM
To: [email protected]<mailto:[email protected]>
Subject: RE: [mssms] Why is this Invoke-Command failing for installing t he
SCCM client?
No, ccmsetup.exe is just a wrapper, it’s still needs all the other files. I
would not even try to remove any source files, who knows what may go wrong.
Daniel Ratliff
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Casey Robertson
Sent: Thursday, December 04, 2014 11:22 AM
To: [email protected]<mailto:[email protected]>
Subject: RE: [mssms] Why is this Invoke-Command failing for installing t he
SCCM client?
Just ccmsetup.exe…. should be all I need?
Casey Robertson
Systems Engineer
W 619.878.9099
E [email protected]<mailto:[email protected]>
MINDBODY, Inc.
4051 Broad Street, Suite 220
San Luis Obispo, CA 93401
[Logo-for-email-signature.jpg] <http://www.mindbodyonline.com/>
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Daniel Ratliff
Sent: December 4, 2014 6:03 AM
To: [email protected]<mailto:[email protected]>
Subject: RE: [mssms] Why is this Invoke-Command failing for installing t he
SCCM client?
Does the full client install reside in c:\windows\temp? The default is
c:\windows\ccmsetup.
Daniel Ratliff
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of steven hosking
Sent: Wednesday, December 03, 2014 8:12 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: [mssms] Why is this Invoke-Command failing for installing t he
SCCM client?
if you change the filepath to something like c:\windows\system32\notepad.exe
with no arguments will it invoke?
From: Casey Robertson<mailto:[email protected]>
Sent: Thursday, 4 December 2014 12:08 PM
To: [email protected]<mailto:[email protected]>
Nope.
Casey Robertson
Systems Engineer
W 619.878.9099
E [email protected]<mailto:[email protected]>
MINDBODY, Inc.
4051 Broad Street, Suite 220
San Luis Obispo, CA 93401
[Logo-for-email-signature.jpg] <http://www.mindbodyonline.com/>
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of steven hosking
Sent: December 3, 2014 3:47 PM
To: [email protected]<mailto:[email protected]>
Subject: RE: [mssms] Why is this Invoke-Command failing for installing the SCCM
client?
Is the ccmsetup.log file being created on the target machine?
Sent from my Windows Phone
________________________________
From: Casey Robertson<mailto:[email protected]>
Sent: 4/12/2014 10:39 AM
To: [email protected]<mailto:[email protected]>
Subject: [mssms] Why is this Invoke-Command failing for installing the SCCM
client?
I have a startup script in place but servers will have to reboot. Security is
restrictive so while the clients can talk to the site server via port 80 it
can’t talk back over the ports needed for client push. SO…..rather than wait
for these servers to reboot (it’s a DEV environment) I’m trying this from a
management box (that doesn’t have SCCM). But nothing happens…no errors. What
am I missing? Something with x64 vs x86 or something obvious? Both source and
target servers are Windows 2012 R2. I got Invoke-Command to run a
WebClient.DownloadFile to get the ccmsetup.exe but this 2nd part to kick off
install isn’t happening.
PS C:\Windows\system32> Invoke-Command -ComputerName SERVER01 -ScriptBlock
{Start-Process -FilePath "C:\Windows\Temp\ccmsetup.exe" -ArgumentList
"/mp:10.9.24.240"}
Casey Robertson
Systems Engineer
W 619.878.9099
E [email protected]<mailto:[email protected]>
MINDBODY, Inc.
4051 Broad Street, Suite 220
San Luis Obispo, CA 93401
[Logo-for-email-signature.jpg] <http://www.mindbodyonline.com/>
The information transmitted is intended only for the person or entity to which
it is addressed
and may contain CONFIDENTIAL material. If you receive this material/information
in error,
please contact the sender and delete or destroy the material/information.
The information transmitted is intended only for the person or entity to which
it is addressed
and may contain CONFIDENTIAL material. If you receive this material/information
in error,
please contact the sender and delete or destroy the material/information.
