The problem is we do not want these objects getting deleted at all. Our ticketing system pulls from SCCM so when you start deleting objects and adding new objects, our ticketing system is becoming littered with old computer names.
We want to reimage a computer, and if the name is different, we need it to stay associated with the same object in SCCM. We want the object for a computer entered one time, and it always lives in AD/SCCM even if renamed. Hopefully this makes sense. From: [email protected] [mailto:[email protected]] On Behalf Of Juelich, Adam Sent: Thursday, April 02, 2015 11:45 AM To: [email protected] Subject: Re: [mssms] RE: Re-imaging computers without deleting sccm object What Steve said... You should have a naming convention and then stick to it to prevent the issues you are creating. Rename the machines at the end or after the fact. Your TS should be zero-touch unless you're dealing with bare-metal. Otherwise, delete the object and handle it that way. If the machines are being re-purposed for a different area you'll most likely want to delete the object anyways depending on how you're doing Application deployment. You don't want the machine to automatically get deployed applications it may no longer need (again, depending on how you're deploying and how you're creating your collections). ----------------------------------------------- Adam Juelich Pulaski Community School District<http://www.pulaskischools.org> Client Management Specialist 920-822-6075 On Thu, Apr 2, 2015 at 10:27 AM, ccollins9 <[email protected]<mailto:[email protected]>> wrote: How are you all dealing with the object in AD? AD doesn't allow duplicate names, so AFAIK the only way to make sure the newly imaged computer gets in AD properly is to either first delete the old object in AD, or go into AD, find the computer, right-click and select and click "reset account" before the TS joins the computer to the domain. This whole thread may lead me to also fully automating this, as we currently have helpdesk members delete the old computer from SCCM and AD first, and if I do automate it, I think my first attempt would be to use the PowerShell commands Remove-CMDevice and Remove-ADComputer. If I venture down that path, ill share my results. On Thu, Apr 2, 2015 at 10:55 AM, Chris Carbone <[email protected]<mailto:[email protected]>> wrote: Currently I have UDI popping up so helpdesk can change name, date, time, and choose software etc. That is good to know if the name stays the same, no new object is created. But need to also figure out how we can keep that same object even if the name changes. From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Steve Whitcher Sent: Thursday, April 02, 2015 10:52 AM To: [email protected]<mailto:[email protected]> Subject: Re: [mssms] RE: Re-imaging computers without deleting sccm object How are you changing the computer name? Are you entering the computer name manually at the start of the task sequence? In my environment, we use a standard naming convention for workstations, so the names never change. Our OSD task sequence is fully automated, so that after initiating the pxe boot there is no user interaction required. SCCM already knows the computer, by MAC and GUID, so the task sequence assigns the computer the same name that it had before. No duplicate computers are created in SCCM or AD. On Thu, Apr 2, 2015 at 9:41 AM, Chris Carbone <[email protected]<mailto:[email protected]>> wrote: So this is great, now we can reimage without dealing with deleting computers in SCCM first. But there is still a problem. When I reimage a computer now, and change the name of it. Both entries appear in AD and SCCM. What I would like to happen is the name changes the existing object, and doesn’t create a new object. Maybe I can add a couple steps to my TS that deletes the old computer name/object before it starts imaging? Just throwing ideas out there. I’m currently testing this out also. If I leave the computer name the same, what happens when you reimage. Thanks again for everyones help! From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Steve Whitcher Sent: Thursday, April 02, 2015 9:52 AM To: [email protected]<mailto:[email protected]> Subject: Re: [mssms] RE: Re-imaging computers without deleting sccm object I know it's one of those things that people will argue about until the end of time, but I'm in the "Never deploy anything to the 'All Systems' collection" camp. ESPECIALLY an OSD task sequence... On Thu, Apr 2, 2015 at 8:38 AM, Ryan <[email protected]<mailto:[email protected]>> wrote: Think of it this way, if you deploy it correctly to All Systems then no one can accidentally deploy it there! You can't deploy a task sequence twice to the same collection. Just make sure you have the song Danger Zone playing in the background when you make the deployment. On Thu, Apr 2, 2015 at 2:26 AM, Andreas Hammarskjöld <[email protected]<mailto:[email protected]>> wrote: If you are on 2012, deply to a collection of your liking, ”All systems” being mentioned and could be safe/unsafe. Just make sure nobody has right to change the PXE/USB/MEDIA flag to “Clients”, and use “Available” rather than “Required”. My 2 swedish kroners! //A From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of ccollins9 Sent: den 1 april 2015 23:49 To: mssms Subject: Re: [mssms] RE: Re-imaging computers without deleting sccm object "You can't change a deployment from available to required without doing some very unsupported things in the database. Can it be done in SCCM 2007? If so, maybe a deployment to All Systems is just what you need to get that upgrade started!" Yes, you're right, I was thinking SCCM 2007 and the idea of it used to terrify me haha. On Wed, Apr 1, 2015 at 12:14 PM, Ryan <[email protected]<mailto:[email protected]>> wrote: You can't change a deployment from available to required without doing some very unsupported things in the database. Can it be done in SCCM 2007? If so, maybe a deployment to All Systems is just what you need to get that upgrade started! On Wed, Apr 1, 2015 at 6:45 AM, ccollins9 <[email protected]<mailto:[email protected]>> wrote: "Advertise the task sequence to All Systems, boot media/pxe only. That’s how we’re doing it in the 2012 system we’re setting up now, seems to work like a charm." I wouldn't ever recommend anyone do this unless you have reallllllly tight control (permissions) over SCCM and ALL the techs working it know it well. All it takes is someone setting that advertisement to "required" and then all the computers in your domain will be re-imaged. Granted there is a safety net there with PXE/Boot Media option, but if a computer reboots and has PXE enabled, wouldn't it boot to PXE and begin the image installation? My recommendation is to give the lower level technicians access to delete machines in certain collections. SCCM is designed to be used by everyone from end-user to the highest tiers of support. You can lock many things down with permissions. We package the SCCM console and push it to all our techs in the IT department. They have the console, but can only do what they have permissions for. Another method and maybe a safer one if the above scares you---SCCM 2012 supports PowerShell commands. Create a service account with permissions to delete objects using the Remove-CMDevice command and script it. On Wed, Apr 1, 2015 at 7:26 AM, Jessie Twaddle <[email protected]<mailto:[email protected]>> wrote: The unknown systems works great for unknown systems, but what do you do when SCCM already knows about the computer and the staff who deploy the images have no access to SCCM? Rather then have them contact Sccm admin every time they need to reimage, I just use wds to deploy the base image. It would be great to use SCCM always. If anyone has an automated way around this issue, please let me know. Jessie On Apr 1, 2015 4:33 AM, "Trond Karstensen" <[email protected]<mailto:[email protected]>> wrote: I always advertise to «all systems» pxe & media only, and to all unknown computers. And password protect the TS. From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Jeff Gilbert Sent: tirsdag 31. mars 2015 22.29 To: [email protected]<mailto:[email protected]> Subject: RE: [mssms] RE: Re-imaging computers without deleting sccm object Available to all unknown systems is the ticket: https://technet.microsoft.com/en-us/library/dn818437.aspx From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Juelich, Adam Sent: Tuesday, March 31, 2015 4:23 PM To: [email protected]<mailto:[email protected]> Subject: Re: [mssms] RE: Re-imaging computers without deleting sccm object Rule of thumb is to never deploy anything to 'All Systems.' Unless you're into extreme sports or something.... ----------------------------------------------- Adam Juelich Pulaski Community School District<http://www.pulaskischools.org> Client Management Specialist 920-822-6075<tel:920-822-6075> On Tue, Mar 31, 2015 at 3:20 PM, Rob Glodt <[email protected]<mailto:[email protected]>> wrote: Advertise the task sequence to All Systems, boot media/pxe only. That’s how we’re doing it in the 2012 system we’re setting up now, seems to work like a charm. Rob Glodt From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Chris Carbone Sent: Tuesday, March 31, 2015 1:15 PM To: [email protected]<mailto:[email protected]> Subject: [mssms] Re-imaging computers without deleting sccm object We currently need to delete the computer out of SCCM each time we want to image a computer. Is there a way where we can image a computer without doing this? We want it to stay in SCCM for asset management from another system that is pulling from SCCM. This electronic mail transmission may contain confidential information intended only for the use of the individual(s) identified as addressee(s). If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on the contents of this electronic mail transmission is strictly prohibited. If you have received this transmission in error, please notify me by telephone immediately. ________________________________ Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. This electronic mail transmission may contain confidential information intended only for the use of the individual(s) identified as addressee(s). If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on the contents of this electronic mail transmission is strictly prohibited. If you have received this transmission in error, please notify me by telephone immediately. This electronic mail transmission may contain confidential information intended only for the use of the individual(s) identified as addressee(s). If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on the contents of this electronic mail transmission is strictly prohibited. If you have received this transmission in error, please notify me by telephone immediately. This electronic mail transmission may contain confidential information intended only for the use of the individual(s) identified as addressee(s). If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on the contents of this electronic mail transmission is strictly prohibited. If you have received this transmission in error, please notify me by telephone immediately.
