Craig,
I realize I'm late on this thread, but it appears there was no resolution to
the problem.  You said you've recently installed a new switch, and that the
workstations starting acting up about that time.

Seems as though the nics and switch ports are not correctly autosensing.
It's a known issue with many nic/switch combos that results in sporadic
network problems just like yours.  Try manually setting the port speeds on
the switch.  100mb/half is the most common denominator around here.

HTH
-Wayne

-----Original Message-----
From: Craig Manske [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 30, 2001 11:34 AM
To: MSWinNT Discussions
Subject: RE: Problems with workstations pausing.


Yeah, I've tried all the easy stuff already. :(  As for the switch, yeah
everything worked fine before the new switches were installed but everything
worked ok for 4 or so months after they were installed.

I'm at the end of my rope here.  I've tried everything short of reinstalling
the OS on the server and I am reluctant to do that just because it's going
to cause way to many other headaches.

Thanks

-----Original Message-----
From: Steve Flook [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 30, 2001 10:11 AM
To: MSWinNT Discussions
Subject: RE: Problems with workstations pausing.


Craig,

I would try another cable and if that doesn't work try switching the port
your PDC is connected on with the new switch.  Both are quick and easy, and
rule out further possibilities.  I have had bad cables give similar
intermittent problems.  Did you have this problem before the new switch?
Good luck.

Steve


------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]

------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]

------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]

------
You are subscribed as [email protected]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]

Reply via email to