Re: Joystick network program working

[Alex Wulms]

] And what about the auto detect option? I asked a couple of days ago, but
] there was no reaction, so I'll ask again:
] Would it be a good idea to connect TRG_A to RIGHT? Using this, we could
] make an "auto detect" option: the program would be able to see in which
] joystick port the network connector is plugged in.
This means we need another additional wire? Why not, with DIN5 we do have 
enough connections available to make it work.

] 
] Also, is it a good idea to connect the ground to the cable shielding? I've
] seen that on a couple of cables.
That will work very well indeed. Then we can use three (or four for the 
autodetect feature) pins for the signal and the shielding for the ground.

Kind regards,
Alex
-- 
Alex Wulms/XelaSoft - MSX of anders NIX - Linux 4 ever
See my homepage for info on the  *** XSA *** format
http://www.inter.nl.net/users/A.P.Wulms


****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****