>:Hello
>:
>:>I wouldn't call it easier, if I were you...
>:>By the way, I think I was wrong, it has to be hold key 5 to
>:give ID 5 and
>:>hold key 6 to give ID 6... You can't give the interface ID
>:7, if I remember
>:>the manual well (I have never tried).
>:
>:
>:Manual? Did you say manual? Where is that manual or do you
>:refer to the readme on disk?
>
>A real one, got it together with BERT...
But the BERT is sooooooo sloooooooooowwwww Get a Novaxis for speed. And
installing a SCSI harddisk is'nt that difficult that you will need a manual
for it...
>
>
>:Btw: does your way save the info in the clockchip or do you
>:have to hold the key each time you reboot?
>:Using SCSID you can do ID-switching with software by setting
>:the proper ID, reset and let your software go on
>
>It does not save it in the clockchip, for then I had to re-press it every
>reboot... My batteries are down, so the info isn't stored. Nope, Novaxis
>saves in the clockchip, but BERT saves it happily into a byte of flash-rom
>or SRAM or whatever it is called, I don't know.
>
>
>~Grauw
>
>
>
>****
>MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and
put
>in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
>quotes :-) Problems? contact [EMAIL PROTECTED]
(www.stack.nl/~wiebe/mailinglist/)
>****
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
