On Tue, 28 Apr 1998, Maico Arts wrote: > > > > > >On Mon, 27 Apr 1998, Stephan Szarafinski wrote: > > > >> ... > >> Which MSX2 did you use? > >> I use a NMS8250 and a Quantum 540mb hd. > >> It works fine, but other HD's don't work. > >> CDROM also never worked. > >I'm also using a NMS8250. But my HD doesn't support LBA mode(Seagate > >ST3290A 261Mb) Perhaps this is the problem. > > > I know the harddisk has to be ATA compliant. I dont know if that is the same > if the harddisk does or doesn�t support LBA. I've looked it up on the net and my HD (st32090a) has an AT-IDE bus. Is this the same as an ATA-IDE bus? LBA is supported for HD over 500Mbyte. > > >What kind of HD's do you mean by 'other': if other HD that support LBA > >don't work, then you'll probably need to remove the resistorarray. Perhaps > >your CDROM will work then too! > > > He, I haven�t seen any resistor array. Does IDE have those too? Yes, behind the IDE connector; the long yellow 'thing'. > > greetings > Maico Arts > I hope we will solve all IDE-problems... JDS **** MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/) ****
