On Sun, 30 Jan 2000, Laurens Holst wrote:
> > What you would need is a converter for the direction of the stick. It
> > would have a functionality like this:
> [...]
> > "||" is "logical or". For this functionality to be logically equivalent
> > with the previous one, ">" should be ">=" and "<" should be "<=", but this
> > doesn't make any difference in this application.
>
> Hmmm... is this going to be my first (well... advanced)
> electronics-project???
> (or is someone else with a little more knowledge about electronics anxious
> to do it)
I often ask for people with more electronics knowledge to make or explain
something, but I get little response. So it is better to try and do it
yourself.
Besides, the converter is not that difficult. You have enough soldering
skill (JoyNet and TI83 cables). And the electronics are not that hard
either, you can find data sheets of most ICs on the web.
What you could do is make a detailed schematic (including IC numbers and
all wires) and send that to the list. Then some people can check it and if
it seems OK, you can start to build it.
And if it works, write an MCCW article about it!
Bye,
Maarten
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]"
(without the
quotes :-) Problems? contact [EMAIL PROTECTED]
****
