> And yes, I know there also is the Novaxis Interface, which is also fast,
> however only on "adapted" 7MHz circuits, and it is also very hard to find.
The Novaxis is fast on 3.5MHz too, compared with BERT: DOSSCAN reported
108kB/s on 3.5MHz. Since I have 8MHz (thanks Erik!), DOSSCAN reports 245kB/s.
> always had difficulties with SCSI-drives, things like IDs and terminators,
> and most of the time it's not indicated very well... (at least it wasn't at
> my drives, and an article I read about it also said there were alot of
> differences between them).
This is not what I experience: terminators are no problem, since almost all
drives have buitin termination. And the ID setup is easy. It's always the
same, you only have to know the ID of your SCSI interface and the one of your
drive.
Someone should write a FAQ about it, so that I can put it in The ULtimate MSX
FAQ.
Grtjs, Manuel ((m)ICQ UIN 41947405)
PS: MSX 4 EVER! (Questions? See: http://www.faq.msxnet.org/)
PPS: Visit my home page at http://bilderbeek.cjb.net/
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]"
(without the
quotes :-) Problems? contact [EMAIL PROTECTED]
****
