On Thu, 20 Apr 2000 22:23:24 +0200, Laurens Holst wrote:
>There is a workaround for this:
>- If adress (switch_back) = 0 then boot normal
>- If adress (switch_back) != 0 then get registers from (save_regs), continue
>with saved PC.
>Just implement it in the BIOS (or something similar, via the Engine), and
>you can easily switch back to Z80 mode.
Sorry, I did not understood your proposal. There is no instruction
to switch back to Legacy Mode. The only possible solution is
reset the entire processor. And, on MSX architeture, this
means a generic MSX reboot. Go to Enhanced Mode is easy and AFAIK
the Z380 even continue with the same PC and other registers (there
is no reset).
AbraçOS/2, Daniel Caetano ([EMAIL PROTECTED])
...!m.tag
OS/2 Sites: http://www.quasarbbs.com/daniel/
http://www.geocities.com/SiliconValley/8752/os2hp/os2index.html
MSX Sites: http://www.fudeba.cjb.net/
Drawings: http://www.djgallery.tsx.org/
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? contact [EMAIL PROTECTED]
More information on MSX can be found in the following places:
The MSX faq: http://www.faq.msxnet.org/
The MSX newsgroup: comp.sys.msx
The MSX IRC channel: #MSX on Undernet
****
