] Currently the software is running fine on the
] emulator on an IBM-PC, but as the software was
] designed for an 80 column screen, it looks screwed.
] I'd need some way to emulate these 80 columns on the
] emulator. I've found the ROM of the 80 column card on
You might try the following:
1) Start the emulator with option -msx2 to enable MSX2 emulation
2) Once in BASIC, enter the command: screen 0
3) Once in screen 0, enter the command: width 80
4) Once in screen 0, 80 column mode, enter the command: set screen
This last command will save your default screen mode to the CMOS RAM (which
is maintained in a configuration file by the emulator)
After doing this, your emulator will always boot in a 80-column MSX2 mode.
Perhaps that your programs can work with this mode. And perhaps not, but you
can try...
Kind regards,
Alex Wulms
--
Visit The MSX Plaza (http://www.inter.nl.net/users/A.P.Wulms) for info
on XelaSoft, Merlasoft, Quadrivium, XSA Disk images, the MSX Hardware list,
SD-Snatcher on fMSX, documentation and lots more.
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? contact [EMAIL PROTECTED]
More information on MSX can be found in the following places:
The MSX faq: http://www.faq.msxnet.org/
The MSX newsgroup: comp.sys.msx
The MSX IRC channel: #MSX on Undernet
****
