] On Tuesday 17 April 2001 13:30, you wrote:
]
] Some additions for the FAQ:
] Yes for the MSX2 and higher machines, but you must have the correct
] connectors . Also if your TV is PAL and your machine boots in NTSC (or vice
] versa) the startup logo will be "scrambled". Once you enter Basic you need
] to type (blindly) VDP(10)=vdp(10)xor2 to togle between PAL and NTSC output
] from your MSX.
This will only change the TIMING fron NTSC to PAL (or reversed). However, it
will NOT change the encoding used for composite video or rf output. So, this
will NOT help for composite video signal or rf signal.
Kind regards,
Alex Wulms
--
Visit The MSX Plaza (http://www.inter.nl.net/users/A.P.Wulms) for info on
XelaSoft, Merlasoft, Quadrivium, SD-Snatcher on fMSX, the MSX Hardware list,
XSA Disk images, documentation, Japanese MSX news from Ikeda and lots more.
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
