On Wed, 18 Apr 2001, David Heremans wrote:
> On Tuesday 17 April 2001 16:09, you wrote:
> > > > Hmm, this question is too general, I think.
> > > >
> > > > > -Which MSX computers can be used with both PAL/NTSC systems?
> > >
> > > An MSX1 is either PAL or NTSC.
> >
> > Depends from MSX1 model :)
>
> That wat I said in the previuos lines, they are fixed.
I did mean that every MSX1 model are not tied to PAL or NTSC,
there are models with RGB output (straight from factory). Their
composite video/RF is fixed due to where they were built,
but some has RGB out, which gives more usage over the NTSC/PAL
boundaries for them.
> I was wondering, we always talk about PAL vs NTSC. But in in France they use
> Secam. It uses the same resolution and intensitie(=black and white) coding as
> PAL, but the colorchannels are different. Using PAL on a Secam system will
> display only the black and white version of the image.
Yes, but standards are so near each other that nowadays all television
sets should be capable to handle PAL/Secam differencies without any
problems.
Greetings: Saku Taipale, [EMAIL PROTECTED]
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
