Hi, Great! synchro works nearly perfectly now !
still some minor problems but i managed to sync my contacts + calandar with evolution, at least :) the remaining problems i see are probably more on the pppd side, on the kernel side and on the ipaq side. the fact that multisync must be started only after vdccm is also a problem for me. it prevents me to forget multisync in the background. i'll try to add stuff to the hotplug script... but as there is no hotplug script for my T610 BT connection i do not know yet what to do. i must confess i have some doubts on my previous configurations. i realized that the cvs rra i installed previously was ./configured without --prefix=/usr. gentoo made me forget such details... i hope it was not the cause of my problems and i hope you have not lost time because of this mistake :-( about the gdb + crashes issue, here is what i have : [synce_get_all_changes:717] Updating last change counter from 0 to 118 [get_changes:141] <----- Program received signal SIG32, Real-time event 32. Program received signal SIG32, Real-time event 32. [sync_done:478] -----> [sync_done:504] <----- Program received signal SIG32, Real-time event 32. Program received signal SIG32, Real-time event 32. Program received signal SIG32, Real-time event 32. ---Type <return> to continue, or q <return> to quit---[synce_socket_read:256] read failed, error: 104 "Connection reset by peer" [synce_socket_read:256] read failed, error: 0 "Success" [rrac_recv_any:204] Failed to read command header [rra_syncmgr_handle_event:696] Failed to receive event, closing connection! [rrac_recv_any:204] Failed to read command header [rra_syncmgr_handle_event:696] Failed to receive event, closing connection! Multiple segmentation faults occurred; can't display error dialog (gnome_segv:24030): Gtk-WARNING **: Ignoring the separator setting Program received signal SIG32, Real-time event 32. Program received signal SIG32, Real-time event 32. Program received signal SIG32, Real-time event 32. Program terminated with signal SIGKILL, Killed. The program no longer exists. (gdb) i doubt it is useful, is it? it happens mainly when i close the connection to the ipaq. as http://multisync.sourceforge.net/devices.shtml#windowsce states that it need more testing, is there a kind of test plan i could run to enhance this status? Thanks for all Regards, Yann --- David Eriksson <[EMAIL PROTECTED]> a écrit : > On Fri, 2004-07-02 at 19:09, y b wrote: > > thx David, > > > > i had to learn a lot of stuffs, but i remain > unlucky > > with multisync running in gdb. i'll have to learn > > more. i dont understand why it idles after a few > > clicks :-(, telling me things i'm not yet able to > > understand : > > > > Starting program: /usr/bin/multisync > > warning: Unable to find dynamic linker breakpoint > > function. > > GDB will be unable to debug shared library > > initializers > > and track explicitly loaded dynamic code. > > Detaching after fork from child process 27309. > > [plugin_init:532] here > > > > Program received signal SIG32, Real-time event 32. > > 0x40c454ac in pthread_getconcurrency () from > > /lib/libpthread.so.0 > > (gdb) > > Weird. Try this command before the "r" command: > > handle all nostop > > > i installed cvs version of multisync, synce, > > synce-kde, synce-multisync_plugin but the problem > is > > still the same : ipaq stays in "synchronisation" > > state for ever, whereas multisync says everything > is > > ok. > > Please update, recompile and reinstall the rra > module, I've fixed som > bugs there. > > > find here attached a vcard and the associated > output > > of multisync. > > Looks like the vCard has a bad format, but I'll see > what I can do to be > able to parse it anyway... > > > when you say my report is useful "At least for the > > SynCE dev team.", does it mean i should also > report on > > synce-users ? > > Everything that concerns Pocket PC is more of a > SynCE issue than a > MultiSync issue, but I reply to questions in this > list too... :-) > > -- > Regards, > -\- David Eriksson -/- > > SynCE - http://synce.sourceforge.net > CalcEm - http://calcem.sourceforge.net > ScummVM - http://scummvm.sourceforge.net > Desquirr - http://desquirr.sourceforge.net > SetiWrapper - http://setiwrapper.sourceforge.net > > > > ------------------------------------------------------- > This SF.Net email sponsored by Black Hat Briefings & > Training. > Attend Black Hat Briefings & Training, Las Vegas > July 24-29 - > digital self defense, top technical experts, no > vendor pitches, > unmatched networking opportunities. Visit > www.blackhat.com > _______________________________________________ > Multisync-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/multisync-users > Créez gratuitement votre Yahoo! Mail avec 100 Mo de stockage ! Créez votre Yahoo! Mail sur http://fr.benefits.yahoo.com/ Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !Téléchargez Yahoo! Messenger sur http://fr.messenger.yahoo.com ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ Multisync-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/multisync-users
