On Mon, Jul 12, 2004 at 06:20:50PM -0700, Phil Dibowitz wrote: > Hey folks, > > I just got the cable (finally) to hook my T637. > > It gets recognized as a USB device: > > Jul 12 18:03:43 rider kernel: usb 1-2: new full speed USB device using address > 2 > > But I can't get multisync to communicate with it. I tried setting it up to use > /dev/ttyUSB0, 1, 2, and 3 to no avail. > > I'm assuming I need to load some other kernel module, but I can't find any > data on the IrMC module... am I missing something.
For what its worth, that's the ONLY message I get in logs. Additionally, it does make a very bare entry in /proc/bus/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0731 ProdID=0528 Rev= 0.01 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms What driver/module is needed to bind to this? Side note, I'm running a 2.6 kernel. -- Phil Dibowitz Systems Architect and Administrator Enterprise Infrastructure / ISD / USC UCC 174 - 213-821-5427
pgpJtx9eJXhLI.pgp
Description: PGP signature
