On Mon, 2005-01-03 at 14:39 +0100, Michael Marcelo Inniss wrote: > Yes, the sync is reported as complete on the phone side. (also on the > multisync side). > > I have just tried syncing ONLY the contacts and the result is the > same... > > Regards, > > Michael > > On Mon, 2005-01-03 at 14:09 +0100, Armin Bauer wrote: > > On Mon, 2005-01-03 at 13:56, Michael Marcelo Inniss wrote: > > > Hello, > > > > > > I have exactly the same problem trying to sync between evolution2 and a > > > sony P910i. On the P910i, the progress bar goes up to 1/2 way and the > > > logs from multisync says "dwelling" - both "freeze" (stop) at this > > > point. I did not attach my logs - they are the same as Pep submitted. > > > > > > To continue, as Pep did I press Stop on the mobile phone side or [if I > > > press Sync on the multisync, the sync is completed, but all the entries > > > are duplicated in evolution]. > > > > > > is that sync also reported "complete" on the phone side? > > > > > > > > I my example, I was trying to sync about 5 calendar entries and 20 tasks > > > (the contact sync was not selected) and the cpu load was not at all > > > high. I used the latest wbxml (patched) and the latest multisync Cvs > > > snapshot. > > > > Can you please try to only sync contacts without calendar? > > > > > > > > I hope this helps - If still require the logs - I can send them... > > > > > > Regards, > > > > > > Michael > > > > > > > > > On Mon, 2005-01-03 at 09:45 +0100, Armin Bauer wrote: > > > > On Mon, 2005-01-03 at 08:46, Pep Turrà wrote: > > > > > Hi, > > > > > > > > > > I can't sync evolution2 - nokia 9500 (syncml)... i found a message on > > > > > the archives saying it works, but I had no luck. > > > > > > > > > > I followed the instructions about nokia 6600, compiled the patched > > > > > libwbxml and 0.8x cvs source. The sync apparently starts, and data is > > > > > exchanged... but the nokia like frozes when the progress bar half of > > > > > the way, saying "Syncing..." until I cancel. No crashes... everything > > > > > seems ok, but the sync never completes. I am attaching the debug > > > > > output produced by multisync. > > > > > > > > What looks odd to me is the log message just before the freeze: > > > > "Dwelling..." > > > > > > > > This means that multisync has finished the sync, saw some new changes > > > > and is waiting for more changes to arrive. Maybe the problem is just > > > > that multisync is not finishing the sync cleanly. > > > > > > > > BTW: > > > > How many contacts are you syncing? > > > > What does your cpu load say while the sync freezes? > > > > > > > > > > > > > > Any help much appreciated, thanks. > > > > > > > > > > pep > > > > > > > > > > > >
The same symptoms can also be seen on Nokia 6260. Actually I thought that this sync starts --> dewlling --> press sync --> complete was "works as intended". And yes, I got duplication on evo2 side. Jarmo Jarmo ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Multisync-users mailing list Multisync-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/multisync-users
