Hi muscle list, I'm evaluating CT-API against PCSC for our usage (newbe). Card Terminal: Kobil Kaan Pro (v1.04)
My first try was to make a request ICC (APDU: 0x20 0x12 0x01 0x00) via CT-API. The communication is done well and the result is sufficient (SW1=0x90, SW2=0x01). The request is part of the CT Basic Command Set (CT-BCS). Then I have installed the PCSC lite environment to send this APDU again via PCSC. The terminal is dedicated (SCardListReaders, ...) successfully, but the answer of the reader is always SW1=0x62, SW2=0x00, which means that the CLA (0x20) is not supported. I can't understand this response because the APDU (including the CLA 0x20) is working fine in the CT-API environment. Again, I'm a newbe in smartcards! So I assume that it must be possible to send an APDU (also including CT-BCS) via PCSC and CT-API with the same result. I'm gratefully for any inspiration. Kind regards, Mit freundlichen Gr��en, Guido Frohn ------------------------------------------------------- Development Engineer Compumatica secure networks GmbH Germanusstra�e 4 D-52080 Aachen Tel.: +49(0) 241 1696-485 Fax : +49(0) 241 1696-410 [EMAIL PROTECTED] _______________________________________________ Muscle mailing list [EMAIL PROTECTED] http://lists.musclecard.com/mailman/listinfo/muscle
