Hello Guido, what card are you using? PC/SC was originally designed for processor cards and not for memory cards. CT-API works with both. This could be the reason why your tests work with CT-API and not with PC/SC.
Stefan Am 10.11.2003 11:16 Uhr schrieb "Guido Frohn" unter <[EMAIL PROTECTED]>: > Hi muscle list, > I'm evaluating CT-API against PCSC for our usage (newbe). > > Card Terminal: Kobil Kaan Pro (v1.04) > > My first try was to make a request ICC (APDU: 0x20 0x12 0x01 0x00) via > CT-API. The communication is done well and the result is sufficient > (SW1=0x90, SW2=0x01). The request is part of the CT Basic Command Set > (CT-BCS). > > Then I have installed the PCSC lite environment to send this APDU again > via PCSC. The terminal is dedicated (SCardListReaders, ...) > successfully, but the answer of the reader is always SW1=0x62, SW2=0x00, > which means that the CLA (0x20) is not supported. > I can't understand this response because the APDU (including the CLA > 0x20) is working fine in the CT-API environment. > > > Again, I'm a newbe in smartcards! So I assume that it must be possible > to send an APDU (also including CT-BCS) via PCSC and CT-API with the > same result. > > I'm gratefully for any inspiration. > > Kind regards, > Mit freundlichen Gr��en, > Guido Frohn > ------------------------------------------------------- > Development Engineer > Compumatica secure networks GmbH > Germanusstra�e 4 > D-52080 Aachen > Tel.: +49(0) 241 1696-485 > Fax : +49(0) 241 1696-410 > [EMAIL PROTECTED] > > > > > _______________________________________________ > Muscle mailing list > [EMAIL PROTECTED] > http://lists.musclecard.com/mailman/listinfo/muscle _______________________________________________ Muscle mailing list [EMAIL PROTECTED] http://lists.musclecard.com/mailman/listinfo/muscle
